Manufactured from premium sanitary grade acrylic, Oliveri’sfreestanding baths are easy to install, with self-supporting,adjustable feet and can be freely located anywhere in yourbathroom.This manual is designed to provide the correct installationsteps and care advice, for a long-lasting installation.Correct and proper use of your bath will ensure itsongoing performance. Please consult the Caring for YourBath section below for advice on cleaning and regularmaintenance.CARING FOR YOUR BATHOliveri uses the highest sanitary grade acrylic, howevernaked flames, cigarettes or strong chemicals willdamage the bath and must be avoided and/or removedimmediately. To preserve the high gloss acrylic surface:When filling the bath start with cold water to allow thebath to gradually adapt to the changing temperature.After using your bath, clean with a soft cloth and warmsoapy water to clean away any oils or soap, to prevent tidemarks and preserve the high-gloss surface.Clean using warm soapy water and only mild liquiddetergents. Do not use powders, pastes, creams,chemicals, window cleaning sprays or abrasive cleaners.Scratches can be removed with a fine polish like Brasso.oliveri.com.auInstallation InstructionsNaplesFreestanding BathsTHIS PRODUCT MUST BE INSTALLED BY A QUALIFIED TRADESPERSONTF151a - Naples Freestanding Bath Installation Instructions Page 1 of 2PRE-INSTALLATION CHECKSInspect the acrylic surface of the bath fordamage. Damage found after installationis not covered by the manufacturer’swarranty conditions. ANY CLAIMS FORDAMAGE WILL NOT BE ACCEPTED AFTERINSTALLATION.Protect your bath before and duringinstallation. Scratches, cracks or othersurface damage sustained during or afterthe installation are NOT COVERED BYWARRANTY.Installation must only be carried out by aQUALIFIED TRADESMAN and in accordancewith building regulations and any localauthority requirements.STOP AND READ CAREFULLY• 10 year warranty (see oliveri.com.au for details)• Manufactured to AS/NZ Standard 2023/1995• Adjustable self-supporting feet• Central waste position (plug and waste not included)