OmniCure S1500 Pro Quick Start Manual
    |
035-00746R R1 Excelitas Canada Inc.2260 Argentia Road, Mississauga ON L5N 6H7Tel: 1-905-821-2600Toll Free: 1-800-668-8752www.excelitas.com/omnicureInstalling the Light Guide1. Remove the protective end caps from the light guide.2. Insert the light guide into the light guide port on the front of the unit untilit sets with a positive click.Note: When the system is powered on, the color of the light ring indicatesthe state of the system as follows:Red: Light Guide not detectedBlue: Light Guide inserted, Lamp strike procedure runningWhite: Light Guide Inserted, Lamp offPurple: Light Guide inserted, Lamp onStart Up1. Install the Lamp module (See Page 3).2. Install the Optical band pass filter (See Page 4).3. Plug the unit into an appropriately grounded AC outlet.4. Turn on the Power switch located at the back of the unit.5. The light ring will light up followed by the display initializing.Note: The system will initiate the lamp strike procedure at startup by default (this can be changed in thesettings – Default Lamp state).If the Default Lamp state setting has been modified to OFF, the lamp strike procedure can be initiated bypressing the Lamp icon.Warning: Allow the lamp to warm-up uninterrupted, do not unplug the system while the lamp is warmingup. Doing so adversely impacts the lamp life and may void the warranty of your lamp.OmniCure® S1500 Pro – Quick Start GuideWarning – Refer to Safety Precautions Booklet 035-00636R, User Guide 035-00707R Prior to use.Using the OmniCure S1500 Pro1. On startup, the OmniCure S1500 Pro will display 3 options on theHome screen: Information, Run and Settings.2. Information and Settings can be accessed while the lamp is turned offor warming up.3. To start running exposures, press the Lamp icon to strike thelamp. Allow the lamp to warm-up (Excelitas recommends 20 minutes ofproper warm-up to ensure stable optical output). During the warm-upperiod, the screen will indicate the minimum warm-up count-down.Warning: UV light and elevated levels of visible light will be emitted from the end of the light guide. |
Related manuals for OmniCure S1500 Pro
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine