Wireless Spectrometer (PS-2600A)IntroductionThe Wireless Spectrometer is specifically designed forintroductory spectroscopy experiments. The Bluetooth and USBconnectivity enables its use with tablets and computers. Withthis one apparatus, you can measure intensity, absorbance,transmittance, and fluorescence, making this a powerful andintuitive tool for your spectroscopy needs.FeaturesTop view:Left view:Right view:Bottom view:Light pathThe path that light takes to reach the cuvette.Cuvette holderUsed to secure the cuvette containing the sample in place.Battery Status LEDIndicates the status of the Wireless Spectrometer’s battery.Battery LED StatusRed ON Low powerRed blink ChargingGreen ON Fully chargedBluetooth Status LEDBlinks blue to indicate that the device is ready to connect.Lights up blue when connected to Spectrometry viaBluetooth.USB Status LEDLights up green to indicate that the device is connected toSpectrometry via USB cable.Reset button accessInsert a pin into this port to perform a full reset of thesensor.USB portUse to connect the device to a USB port or powered USBhub on a computer via the included USB cable.ON/OFF buttonPress to turn the device on. Press and briefly hold to turnthe device off.Device ID numberUse this to identify the device when connecting toSpectrometry via Bluetooth.Drain portsAllow the sample to drain out of the device if a spill occursduring an experiment.Equipment and requirementsIncluded equipment:• Wireless Spectrometer (PS-2600A)• Cuvette and lid (10 each)• USB cableRecommended equipment:• Fiber Optic Probe (PS-2601)Required software: SpectrometrySoftware for Computer or TabletAvailable free for Mac and PC computers and iPadand Android* tablets at the PASCO website:www.pasco.com/downloads/spectrometry.Download the software from the PASCO website (Mac and PC),or from the iOS or Android app store or Google Play.*Android tablet must be Bluetooth-compatible.Product Guide | 012-17423A1