PaintLine PDREX3 Assembly Instructions Manual
   |
PDREX3 AssemblyInstructionsStep 1OPEN THE PDREX.M BOX FIRST. Place onescissor crossbar on the ground (as shown).Attach the crossbar in the center using thenylon washers between the tubes andsupplied boltsPlace 1 of the PDREX.M (uprights) on the ground asshown either the left or right of the PDREX. Attach thescissor connectorsStep 2Add the lower connectors to the back as shown.Step 3Add the casters and secure with 1/2-13 nutsStep 4 |
Related manuals for PaintLine PDREX3
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine