Panasonic BB-HCM381 Getting Started

Also see for BB-HCM381: Operating instructions Installation guide Troubleshooting Important information Operating instructions

Contents

Panasonic BB-HCM381 Getting Started Manual pdf 1 page image

Getting StartedNetwork CameraModel No. BB-HCM381 (AC Adaptor Type)BB-HCE481 (PoE Type)Connect the Ethernet cable (customer-provided) to the camera.Noteï These instructions assume that your PC is already connected to the Internet andyour network includes a router that is UPnP ô (Universal Plug and Play) compliant.Connect the Ethernet cable (customer-provided) to yourrouter.Ethernet (LAN) portEthernet cable(customer-provided)To the networkLAN portsWAN portTo the supplyTo the cameraTo your modemTo your PCA "straight" Cat5 Ethernetcable (customer-provided)Connect the AC adaptor cord to the DC IN jack, and plug theAC cord into the power outlet.ï When you operate the camera, the power outlet should be near the camera andeasily accessible.ï Use only the specified Panasonic AC adaptor PSLP1242 (Order No.PSLP1242Z).ï If the camera's indicator does not light green, see pages 3-4 of Troubleshootingon the CD-ROM.ï A noise can be heard during pan/tilt operation. This is normal.DC IN jackHook for AC adaptor cordAC adaptorTo the power outletAC cordAC adaptor cord© 2006 Panasonic Communications Co., Ltd. All Rights Reserved.PQQX15194ZA KK0306JT0 (CE)Please read the Important Information before using.ï This Getting Started explains how to connect and set up the camera.See the Installation Guide for mounting, and see the OperatingInstructions on the CD-ROM for details about the cameraís features.ï The CD-ROM provides Getting Started in the following languages:English, French, German, Italian, Spanish, Russian, Simplified Chineseand Korean.ï If you cannot complete the setup, see Troubleshooting on theCD-ROM.This manual is for both BB-HCM381 (AC Adaptor Type) and BB-HCE481(PoE Type). Available features and operations are different in partdepending on the model. Read the Operating Instructions on the CD-ROM carefully and use the camera properly.BB-HCM381 User: See below.BB-HCE481 User: Go to page 2.Trademarksï Adobe, Acrobat and Reader are either registered trademarks or trademarks ofAdobe Systems Incorporated in the United States and/or other countries.ï Microsoft, Windows and ActiveX are either registered trademarks or trademarks ofMicrosoft Corporation in the United States and/or other countries.ï This software is based in part on the work of the Independent JPEG Group.ï Screen shots reprinted with permission from Microsoft Corporation.ï All other trademarks identified herein are the property of their respective owners.Abbreviationsï UPnP is the abbreviation for "Universal Plug and Play".ï "Network Camera" is called "Camera" in this manual.ï "Setup CD-ROM" is called "CD-ROM" in this manual.1. Connect the camera (BB-HCM381), and turn the camera on.Connect the camera to your router using a "straight" Cat5 Ethernet cable (customer-provided) to set up the camera.ï Before you begin the installation, the UPnPô feature in your router needs to be enabled. Usually, the default setting disables this feature. For more info, please visit,http://panasonic.co.jp/pcc/products/en/netwkcam/ or contact your router's manufacturer.Indoor Use OnlyConnecting an External Microphone or SpeakerNoteï If you use an external microphone, excessive cable length or a poor quality cable cancause a degradation in audio quality.ï The cables for the external microphone and external speaker must be shielded, andless than 2.4 m long including the included Audio Cable. Using nonstandard cablesmay cause sound interference due to strong radio waves.ï Use a speaker with a built-in amplifier. The speaker connects to the camera with astereo audio cable similar to that used by your PC. The output signal is mono.ï Make sure the camera and speaker are turned off when connecting or disconnectingthe Audio Cable or speaker cable, otherwise noise may be heard from the speaker.ï Use only the included Audio Cable when connecting an external microphone orspeaker.ï The external microphone input (via the Audio Cable) does not correspond to a linelevel. Audio may be distorted when the line level is input. Audio distortion will besolved if you insert the following circuits. Under no circumstance should high-levelaudio, such as from a speaker, be connected to this input terminal. Doing so is likelyto damage the camera.Audio CableAudio TerminalFor speaker (red)(Output impedance560 line level)Speaker cable( 3.5 mm stereo mini plug)For microphone (white)(Plug-in power +3.3 V)Microphone cable( 3.5 mm mini plug) ΩTo microphone To speakerCameraMicrophone Input(via Audio Cable)Audio LineOutCapacitorResistor1 F33 K

/ 4

Related manuals for Panasonic BB-HCM381