Panasonic BL-C111 Installation Manual
Also see for BL-C111: Comparison chartImportant informationSetup guideSpecificationsSpecification sheet
    |
Installation GuideNetwork CameraModel No. BL-C111 (Wired Type)BL-C131 (Wireless/Wired Type)This manual is written for both the BL-C111 (Wired Type) and BL-C131 (Wireless/Wired Type). Available features and operations vary slightlydepending on the model. You can confirm the model no. of your camera by checking the model no. printed on the front of the camera.Please read the included Important Information before proceeding.Complete Operating Instructions and all other documentation can be found on the included CD-ROM.• This document (Installation Guide) explains how to physically connect the camera to the power supply and network, as well how to mount or place thecamera for regular use.• The Setup Guide describes how to set up the camera so that it can be accessed using a PC.• Refer to the Operating Instructions on the CD-ROM for details regarding the camera's features.• Refer to the Troubleshooting Guide on the CD-ROM if you have any problems configuring or using the camera.Abbreviations• UPnP is the abbreviation for “Universal Plug and Play”.• The Network Camera is referred to as “the camera” in this document.• The Setup CD-ROM is referred to as “the CD-ROM” in this document.Installation Procedure OverviewThe following is an overview of the steps required to install and setup the camera. All steps are explained in this document unless otherwise noted.Preparation1. Confirm the following items are included in the camera’s packaging.2. You will need the following additional items to install and configure the camera.– a PC (see the system requirements in the Important Information document)– a LAN cable (CAT-5 straight cable)– a routerPreparationConfirm that you have all theitems required for installation.Camera DiagramMake sure you know the namesof the camera’s physicalfeatures.ConnectionsConnecting the camera to yournetwork and to the power outlet.SetupSetting up the camera(described in the included SetupGuide). This involves configuringthe camera so that it can beaccessed from a PC.MountingMounting or placing the camera.Main Unit (1 pc.)The appearance of your cameradepends on which model youhave purchased.Screw A (2 pcs.)Order No. PQHE5004XUsed for wall mounting thecamera.Washer S (2 pcs.)Order No. XWG35FJUsed when mounting the camera.AC Adaptor (1 pc.)Order No. PQLV206CEY(Cord Length: About 3 m)For use in countries/areasother than the United KingdomScrew B (1 pc.)Order No. XTB4+20AFJUsed for securing the safety wireto the wall.Washer L (1 pc.)Order No. XWG4F16VWUsed when securing the safetywire to the wall.Order No. PQLV206EY(Cord Length: About 3 m)For use in the United KingdomSafety Wire Screw (1 pc.)Order No. PQHD10110ZUsed for securing the safety wireto the camera.Important Information (1 pc.)Installation Guide(this document) (1 pc.)Setup Guide (1 pc.)Safety Wire (1 pc.)Order No. PQME10080ZUsed to secure the camera whenwall mounting it.Setup CD-ROM (1 pc.)Order No. PNQC1048ZContains the Setup Program needed to configure the camera,as well as the camera’s documentation.**See the included Important Information for a description of each document.BL-C111 BL-C131© Panasonic System Networks Co., Ltd. 2007PQQX15803YA KK0107CM1020 (CE)Please read this document before using the product, and save this document forfuture reference.• This document can be found on the included CD-ROM. English, French, German,Italian, Spanish, Russian, Simplified Chinese, Korean, Danish and Swedish versionsare included.Indoor Use Only |
Related manuals for Panasonic BL-C111
manualsdatabase
Your AI-powered manual search engine