Panasonic BL-C111A Installation Manual

Also see for BL C131A - Network Camera - Pan: Operating instructions Setup guide Operating instructions Service manual Integration notes

Contents

Panasonic BL-C111A Installation Manual Manual pdf 1 page image

Installation GuideNetwork CameraModel No. BL-C111A (Wired Type)BL-C131A (Wireless/Wired Type)This manual is written for both the BL-C111A (Wired Type) and BL-C131A (Wireless/Wired Type). Available features and operations vary slightlydepending on the model. You can confirm the model no. of your camera by checking the model no. printed on the front of the camera.Please read the included Important Information before proceeding.Complete Operating Instructions and all other documentation can be found on the included CD-ROM.• This document (Installation Guide) explains how to physically connect the camera to the power supply and network, as well how to mount or place thecamera for regular use.• The Setup Guide describes how to set up the camera so that it can be accessed using a PC.• Refer to the Operating Instructions on the CD-ROM for details regarding the camera's features.• Refer to the Troubleshooting Guide on the CD-ROM if you have any problems configuring or using the camera.Abbreviations• UPnP is the abbreviation for “Universal Plug and Play”.• The Network Camera is referred to as “the camera” in this document.• The Setup CD-ROM is referred to as “the CD-ROM” in this document.Installation Procedure OverviewThe following is an overview of the steps required to install and setup the camera. All steps are explained in this document unless otherwise noted.Preparation1. Confirm the following items are included in the camera’s packaging.• Additional pieces can be ordered by calling 1-800-332-5368.2. You will need the following additional items to install and configure the camera.– a PC (see the system requirements in the Important Information document)– a LAN cable (CAT-5 straight cable)– a routerPreparationConfirm that you have all theitems required for installation.Camera DiagramMake sure you know the namesof the camera’s physicalfeatures.ConnectionsConnecting the camera to yournetwork and to the power outlet.SetupSetting up the camera(described in the included SetupGuide). This involves configuringthe camera so that it can beaccessed from a PC.MountingMounting or placing the camera.Main Unit (1 pc.)The appearance of your cameradepends on which model youhave purchased.Screw A (2 pcs.)Order No. PQHE5004XUsed for wall mounting thecamera.Washer S (2 pcs.)Order No. XWG35FJUsed when mounting the camera.AC Adaptor (1 pc.)Cord Length: About 3 m (9 feet10 inches)Order No. PQLV206YScrew B (1 pc.)Order No. XTB4+20AFJUsed for securing the safety wireto the wall.Washer L (1 pc.)Order No. XWG4F16VWUsed when securing the safetywire to the wall.Safety Wire (1 pc.)Order No. PQME10080ZUsed to secure the camera afterwall mounting it.Safety Wire Screw (1 pc.)Order No. PQHD10110ZUsed for securing the safety wireto the camera.Important Information (1 pc.)Installation Guide(this document) (1 pc.)Setup Guide (1 pc.)Setup CD-ROM (1 pc.)Order No. PQQX15699ZCDContains the Setup Program needed to configure the camera, as well as the camera’s documentation.**See the included Important Information for a description of each document.BL-C111A BL-C131A© 2006 Panasonic Communications Co., Ltd. All Rights Reserved.PQQX15707ZA KK1106MH0Please read this document before using the product, and save this document for futurereference. Panasonic Network Camera Website: http://www.panasonic.com/netcamfor customers in the USA and Puerto RicoIndoor Use Only

/ 4

Related manuals for Panasonic BL C131A - Network Camera - Pan