$/09(08*54+0:054,8;9,9:/,8,-80.,8(4:" >:,84(2+0(3,:,85-9,8<0*,658:" Split System Air Conditioner INSTALLATION INSTRUCTIONSNOTE& Contents PageIMPORTANT!Please Read Before Starting .................................. 21. GENERAL .......................................................... 41-1. Tools Required for Installation (not supplied)1-2. Accessories Supplied with Unit1-3. Optional Copper Tubing Kit1-4. Type of Copper Tube and Insulation Material1-5. Additional Materials Required for Installation2. INSTALLATION SITE SELECTION ................... 52-1. Indoor Unit2-2. Outdoor Unit3. HOW TO INSTALL THE INDOOR UNIT ........... 133-1. Remove the Rear Panel from the Unit3-2. Make a Hole3-3. Install the Rear Panel on the Wall3-4. Removing and Installing the Grille3-5. Shape the Indoor Side Tubing3-6. Wiring Instructions3-7. Wire Size and Length3-8. Wiring Instructions for Inter-unit Connections3-9. Mounting3-10. Frame Fastening Method3-11. Drain Hose4. HOW TO INSTALL THE OUTDOOR UNIT ....... 234-1. Wiring Instructions for the Outdoor Unit4-2. Routing the Tubing and Wiring5. REFRIGERANT TUBING .................................. 245-1. Use of the Flaring Method5-2. Flaring Procedure with a Flare Tool5-3. Caution before Connecting Tubes Tightly5-4. Connecting Tubing between Indoor andOutdoor Units5-5. Insulation of Refrigerant Tubing5-6. Taping the Tubes5-7. Finishing the Installation6. AIR PURGING................................................... 26 Air Purging with a Vacuum Pump (for Test Run) Basic Functions of the Service Valves Pump Down Service Valve Connections7. REMOTE CONTROLLER INSTALLATIONPOSITION ......................................................... 307-1. Mounting on a Wall8. ADDRESS SWITCH .......................................... 318-1. Address Setting of the Remote ControllerModel CombinationsCombine indoor and outdoor units only as listedbelow.Model No.Indoor Unit Outdoor UnitCS-KE30NKU CU-KE30NKUCS-KE36NKU CU-KE36NKUPower Source:60 Hz, single-phase, 230/208 V