Panasonic CZ - RD52CP-1 User Manual

Panasonic CZ - RD52CP-1 User Manual Manual pdf 1 page image

23 4SETTING CURRENT DAY AND TIMEThe current day and time need to be set when you turn on the power for the first time or after a long time haselapsed since the power was last turned on.The current time becomes the standard time for all the Timer operations.Set the current time and day accurately.Example: Current Day is Wednesday and Current Time is 8:001 Turn on the power supply OFF / ON2 Press CLOCKTIMER/CLOCKMODEOFF/ONCANCELCLOCKSETSELECTUPDOWNMON“MON” and “12:00” will beblinking3 Select Current DayPress UPor DOWNto select current day. (Refer to the above example; select WED)To confirm the selected day, press SET.4 Select Current TimePress UPor DOWNto select current time. (Refer to the above example; select 8:00)To confirm the selected time, press SET.Note:- Press UPto increase or DOWNto decrease (1-minute step) or hold the button to change the timefaster.- IfUPorDOWNis not pressed for 30 seconds during the day or time setting or if SETis pressed, thesetting at that moment is confirmed and setting will end.WEDFinal CLOCK Display“:” will be blinkingUser ManualWired Remote ControlACXF55-03630 1/3CZ - RD52CP-1OFF / ONTEMPTIMER/CLOCKMODEQUIET/POWERFULFAN SPEEDMODECHECK RESETAIR SWINGOFF/ONCANCELCLOCKSETSELECTUPDOWNAC RCOFF / ONTEMPTIMER/CLOCKMODEQUIET/POWERFULFAN SPEEDMODECHECK RESETAIR SWINGOFF/ONCANCELCLOCKSETSELECTUPDOWNAC RCPRODUCT OVERVIEWPRODUCT OVERVIEW71114 15 1719182024 5310968112131 Operation LED 11 Remote Control Reset Button2 OFF/ON Button 12 OFF Indicator3 Temperature Setting Button 13 Operation Mode Selection Indicators4 Operation Mode Button 14 Timer/Clock Setting Display5 Fan Speed Button 15 Fan Speed Display6 Airflow Direction Selection Button 16 Airflow Direction Setting Display7 Quiet/Powerful Operation Button 17 Temperature Setting Display8 Timer Setting Button Group 18 Quiet Operation Indicator9 Check Button 19 Powerful Operation Indicator10 Air Conditioner Reset Button 20 System Error Display16OPERATIONSOPERATIONSREMOTE CONTROL PREPARATIONREMOTE CONTROL PREPARATION1 TO TURN ON OR OFF THE UNIT OFF / ON• Please be aware of the OFF indication on the remote control display to prevent the unit fromstarting/stopping improperly.• For normal operation, OFF indicator shown on remote control display when the unit is turn off.2 TO SET TEMPERATURE TEMP• Selection range: 16°C ~ 30°C.3 TO SELECT OPERATION MODE MODEAUTO mode - For your convenience• Unit selects operation mode according to temperature setting, outdoor and room temperature.HEAT mode - (function not available)• When HEAT mode is selected, the unit will not be able to turn ON/OFF.COOL mode - To enjoy cool airDRY mode - To dehumidify the environment• Unit operates at low fan speed to give a gentle cooling operation.• During soft dry operation, the indoor fan operates at a low fan speed.• The louvers movement might not align with the remote control display.4 TO SELECT FAN SPEED (5 options) FAN SPEED• For AUTO, the indoor fan speed is automatically adjusted according to the operation mode.5 TO ADJUST VERTICAL AIRFLOW DIRECTION (5 options) AIR SWING• Keeps the room ventilated.• If AUTO is set, the louvers swing up/down automatically.• For Hide-Away models, AIR SWING buttons are not in use. Airflow direction can not be adjusted.6 POWERFUL NORMALQUIET QUIET/POWERFULQUIET - TO ENJOY QUIET ENVIRONMENT• This operation reduces airflow noise.POWERFUL - TO ACHIEVE TEMPERATURE QUICKLYENGLISHTABLE OF CONTENTSProduct OverviewRemote Control PreparationOperationsHow to Select the TimerDaily Timer SettingWeekly Timer SettingTroubleshooting234567~88Panasonic CorporationWeb site: http://www.panasonic.com© Panasonic Corporation 2016ACXF55-03630_SS0416-0.indb 1ACXF55-03630_SS0416-0.indb 1 28/04/2016 9:06:30 AM28/04/2016 9:06:30 AM