Panasonic DC-G95 Quick Manual

Also see for Lumix DC-G95: Basic owner's manual Owner's manual

Panasonic DC-G95 Quick Manual Manual pdf 1 page image

Quick Guide for 4K PhotoENGLISHDVQW1535ZADigital CameraModel No. DC-G951 Recording 4K photosYou can select the desired moment from a burst of pictures taken at 30 frames/second and save that moment as a picture of 8 million pixels (approx.).Using the 4K Photo function to capture the best shot of the subject([4K Burst] / [4K Burst(S/S)] / [4K Pre-Burst])2 Selecting the desired focus area andsaving a picture1 Recording using [Post Focus]2 Selecting pictures from 4K burst file and savingMarkers have been set by the camera automatically on a scene in which a face or the movement of a subject is detected during recording, for example, atthe scene when a vehicle passes by or a person turns around. (Auto Marking)1 Press [ ].2 Press /to select an image indicated with the [ ] icon.3 Press . If the image was recorded with [ ] ( [4K Pre-Burst]), proceed to step 5.4 Drag the slide bar to make a rough selection of scenes. You can skip to a marked position by touching the marker.White marker: Manually set marker / Green marker: Marker set by the camera automatically5 Drag the frames to select the frame you want to save as a picture.6 Touch [ ] to save the picture. The picture will be saved in JPEG format.Fn1AUTO MODE1 Select [Sequence Composition] from the [Playback] menu. [MENU/SET] [Playback] [Sequence Composition]2 Press / to select the 4K burst files, and press [MENU/SET].3 Select frames to combine (from 3 to 40 frames).4 Press / to select [Save], and press [MENU/SET].The camera can perform Burst recording in the same picture quality as 4K photo recording while automatically shifting the focus to different areas.After the recording, you can select the desired area on the screen and save a picture in which the selected area is in focus.Controlling Focus After Recording (Post Focus/Focus Stacking)Showing movement by combining a sequence of pictures ([Sequence Composition])3 Using Focus Stacking and saving a pictureYou can also merge multiple pictures with different focus areas to widen the focus range. (Focus Stacking)1 Touch [ ] in step 3 of “Selecting the desired focus area and saving a picture”.2 Touch the merging method.[Auto Merging]Automatically selects pictures that are suited to be merged, and merges them into a single picture.Priority will be given to pictures with closer focus.Perform the focus stacking and save the picture.[Range Merging]Merges pictures with specified focus areas into a single picture.(When [Range Merging] is selected)3 Touch the desired focus area. Specify at least two areas. In-focus areas between the selected two points are indicated. Parts that cannot be selected are indicated in grey. Touch again to cancel the selection.4 Touch [ ] to merge the pictures and save the resulting picture. The picture will be saved in JPEG format.Fn1 6HW&DQFHO5HVHWュリヴヱハFn1 6HW&DQFHO5HVHWュリヴヱハWe recommend that you use a tripod when recording images to be used forFocus Stacking.1 Set the drive mode dial to [ ] (Post Focus).2 Decide on the composition, and press theshutter button halfway.3 Press the shutter button fully to startrecording.Setting Pre-Burst Recording ([4K Burst]/[4K Burst(S/S)] only)[MENU/SET]  [Rec]  [4K PHOTO]  [Pre-Burst Recording]  [ON]The camera starts recording approximately 1 second before the shutter button is pressed fully, so you will not miss a photo opportunity.1 Press [ ].2 Press /to select an imageindicated with the [ ] icon, andpress .3 Touch the desired focus area. If a picture that is in focus is not available forthe selected area, a red frame will be displayed.You cannot save a picture in this case.4 Touch [ ] to save the picture. The picture will be saved in JPEG format.Fn11 Set the drive mode dial to [ ] (4K Photo).2 Select [Rec Method] in [4K PHOTO] in the [Rec] menu, and press [MENU/SET].3 Press the cursor buttons / to select the method used to record 4K photos,and press [MENU/SET]. After selecting the method used to record 4K photos, press the shutter button halfway to display therecording screen. Drive mode dial Cursor button[4K Burst]For capturing the best shot of a fast-moving subject(e.g., sports, aeroplanes, trains)Burst recording is performed while the shutter button is pressed and held.The shutter sound will be heard repeatedly.1 Press the shutter button halfway.2 Press and hold the shutter button fully for as long as youwant to perform recording.Press the button fully slightly in advance. Recording starts approximately0.5 seconds after it has been pressed fully.Press and holdRecording is performed[4K Burst(S/S)]For capturing unpredictable photo opportunities(e.g., plants, animals, children)Burst recording starts when the shutter button is pressed and stops whenpressed again. Start and stop tones will be heard.1 Press the shutter button fully.2 Press the shutter button fully again.When you press the [Fn2] button while recording, you can add a marker.When selecting and saving pictures from a 4K burst file, you can skip to thepositions where you added markers.Start (First)Stop (Second)Recording is performed[4K Pre-Burst]For recording as needed whenever a photo opportunity arises(e.g., the moment when a ball is thrown)Burst recording is performed for approximately 1 second before and afterthe moment that the shutter button is pressed. The shutter sound will beheard only once.1 Press the shutter button fully.In situations where you want to lock focus and exposure, such as when thesubject is not at the centre, use [AF/AE Lock]. Approximately 1 secondRecording is performedBurst pictures are saved as a single 4K burst file in the MP4 format.Use a UHS Speed Class 3 card to record 4K photos.When recording 4K photos, the angle of view is narrower.If you are using Auto Focus, Continuous AF will work while recording. Focus will be adjusted continuously.You can reduce the blur of the subject by setting a faster shutter speed.Approximate shutter speed for outdoor recording in fine weather conditions: 1/1000 seconds or faster.4K burst file will be recorded and played back in separate files in the following cases. (You can continue recording without interruption.)When using an SDHC memory card: If the file size exceeds 4 GBWhen using an SDXC memory card: If the continuous recording time exceeds 3 hours and 4 minutes or if the file size exceeds 96 GBIf the surrounding temperature is high or 4K photos are recorded continuously, [ ] may be displayed and recording may be stopped halfway through. Wait untilthe camera cools down.When [ ] ([4K Pre-Burst])* or [Pre-Burst Recording] is set, the battery drains faster and the camera temperature rises. Use these functions only when recordingwith them.* To protect itself, the camera may switch to [ ] ([4K Burst]).Setting Loop Recording ([4K Burst(S/S)] only)[MENU/SET]  [Rec]  [4K PHOTO]  [Loop Recording(4K PHOTO)]  [ON]The camera performs recording while deleting the data of the preceding part so that you can continue recording while waiting for a photoopportunity, without replacing the card.Once you start recording, the 4K burst file will be recorded and divided approximately every 2 minutes. Approximately the last 10 minutes (up toapproximately 12 minutes) will be saved. The preceding part will be deleted.

/ 2

Related manuals for Panasonic Lumix DC-G95