Panasonic DMP-BDT270 Basic Owner's Manual

Also see for DMP-BD93: Owner's manual Basic owner's manual Owner's manual Basic owner's manual

Panasonic DMP-BDT270 Basic Owner's Manual Manual pdf 1 page image

Thank you for purchasing this product.Please read these instructions carefully before usingthis product, and save this manual for future use.A more detailed owner’s manual is available in“Owner’s Manual (PDF format)”. To read it,download it from the website.http://av.jpn.support.panasonic.com/support/global/cs/bd/oi/index.htmlYou will need Adobe Reader to browse or print theOwner’s Manual (PDF format).You can download and install a version of AdobeReader that you can use with your OS from thefollowing website. (As of December 2014)http://www.adobe.com/products/acrobat/readstep2.html≥ Product numbers are provided in these Owner’s Manual correctas of December 2014. These may be subject to change.≥ Do not use AC power supply cord and AC adaptor with other equipment.≥ Do not use any other AC power supply cords and AC adaptorsexcept the supplied one.Using the remote control– Insert the batteries to the terminal so that it (i and j)matches those in the remote control.1 Turn the unit on and off2 TV operation buttonsYou can operate the Panasonic TV using this unit’s remotecontrol. Some buttons may not work depending on the TV.[Í TV] : Turn the TV on and off[AV] : Change input[i j VOL] : Adjust the volume3 Select title numbers, etc./Enter numbers or[BDT270] characters4 Cancel5 Basic playback control buttons6 Show Closed Caption setup screen7 Show Pop-up menu/Top menu8 Show Option menu9 Colored buttons (red, green, yellow, blue)Used for various purposes depending on the display.10 Transmit the remote control signal11 Open or close the disc tray12 Show the status messages13 [BDT270] Switch Secondary Video on/off (Picture-in-picture)14 Change soundtrack15 [BDT270] Show Miracast TM screen16 Show the Home Screen of Network Service17 Exit the Menu screen18 Show Netflix screen19 Show HOME menu20 [3, 4, 2, 1] : Move the highlight for selection[OK] : Confirm the selection(;1) : Frame-by-frame21 Return to previous screen22 [BD93] Show Setup menu1 Disc tray2 USB port3 POWER LEDThe LED lights when the unit is turned on, andflashes when error occurs.4 Remote control signal sensorDistance: Within approx. 7 m (23 feet)Angle: Approx. 20e up and down, 30e left and right5 Open or close the disc tray6 [BDT270] Stop7 [BDT270] Start play8 Standby/on switch (Í/I)Press to switch the unit from on to standby modeor vice versa. In standby mode, the unit stillconsumes a small amount of power.Basic Owner’s ManualBlu-ray Disc TM PlayerModel No. DMP-BDT270DMP-BD93Firmware updatesPanasonic is constantly improving the unit’s firmwareto ensure that our customers are enjoying the latesttechnology.Panasonic recommends updating your firmware assoon as you are notified.P PCUnless otherwise indicated, illustrations in theseOwner’s Manual are of DMP-BDT270.SQT0698-1F1214JY1124If you have any questions, visit :U.S.A. : www.panasonic.com/supportCanada : www.panasonic.ca/english/supportRegister online at www.panasonic.com/register(U.S. customers only)AccessoriesCheck the supplied accessories before using this unit.1 Remote control[BDT270] (N2QAYB001023)[BD93] (N2QAYB001024)2 Batteries for remote control1 [BDT270] AC power supply cord(K2CB2YY00092)1 [BD93] AC adaptor (SAE0001)[For_Canada]The enclosed Canadian French label sheet corresponds to theEnglish display on the unit. R6/LR6, AA(Alkaline or manganesebatteries)Control reference guide12354672089211917161815141312111034 14 16 12221121[BD93]1 2341 2 3 4875 685[BD93][BDT270]Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.Quick Start GuideSTEP 1 : Connecting to a TVSTEP 2 : Connecting to the network∫ Wireless LAN connectionHDMI INTo an AC outletHDMI cableAC power supply cord (supplied)[BDT270][BD93]AC adaptor (supplied)[BDT270] [BD93]This unit consumes a small amount of AC power (> “Specifications”) even when turned off in standby mode.For the purpose of energy conservation, the unit should be disconnected if you will not be using it forextended period of time.Wireless router, etc. Internet[BDT270]∫ LAN cable connectionBroadband router, etc. InternetLAN CableSTEP 3 : Settings21 HDMI HDMITVTurn on the TV and select the appropriate videoinput.Press [Í/I].Follow the on-screen instructions to continue withthe settings.STEP 4 : Playback1 2Insert the media. Press [OK] or [3, 4, 2, 1] to select the item.≥ If there are any other items, repeat this step.The following functions may not work depending on the media and contents.BD-Video : VideoBD-RE : Video,JPEG, MPO* 1 ,AAC, ALAC, DSD* 1 , FLAC, MP3, WAV, WMABD-R : Video, MKV, Xvid* 2 ,AAC, ALAC, DSD* 1 , FLAC, MP3, WAV, WMADVD-Video : VideoDVD-R/DVD-R DL : Video, AVCHD, MKV, Xvid* 2 ,JPEG, MPO* 1 ,AAC, ALAC, DSD* 1 , FLAC, MP3, WAV, WMADVD-RW/+R/+RW/+R DL : Video, AVCHDMusic CD : Music [CD-DA]CD-R/CD-RW : MKV, Xvid* 2 ,JPEG, MPO* 1 ,AAC, ALAC, FLAC, MP3, Music [CD-DA], WAV, WMAUSB devices (up to 4 TB) : MKV, MP4, MPEG2, Xvid* 2 ,JPEG, MPO* 1 ,AAC, ALAC, DSD* 1 , FLAC, MP3, WAV, WMA∫ Region management informationThe unit can play back BD-Video/DVD-Video discs of the following regions codes, including “ALL”:≥ The unit cannot playback discs in PAL format.*1 [BDT270] o nly*2 Canada only≥ Specifications are subject to change without notice.Operating during playbackStop Press [∫STOP].The stopping point is memorized.Resume play functionPress [1PLAY] to restart from this point.≥ The point is cleared if the media is removed.Pause Press [;PAUSE]. Press [;PAUSE] again or [1PLAY] to restart play.Search While playing, press [SEARCH6]or [SEARCH5]. The speed increases up to 5 steps.≥ Press [1PLAY] to revert to normal playback speed.Slow-motion While paused, press[SEARCH5].Skip While playing or paused, press[:] or [9]. Skip to the title, chapter or track.Playable media1BD-Video DVD-VideoExample:Firmware updatesOccasionally, Panasonic may release updatedfirmware for this unit that may add or improve theway a feature operates. These updates areavailable free of charge.This unit is capable of checking the firmwareautomatically when connected to the Internet via abroadband connection.When a new firmware version is available, thefollowing message is displayed.You can also download the latest firmware from thefollowing website and store it to a USB device toupdate the firmware.http://panasonic.jp/support/global/cs/(This site is in English only.)DO NOT DISCONNECT the unit from the ACpower or perform any operation while the updatetakes place.After the firmware is installed, unit will restart andthe following screen will be displayed.e.g.,≥ To show the firmware version on this unit;[BDT270] [HOME] > “Setup” > “Player Settings” > “System” >“System Information” > “Firmware Version Information”[BD93] [SETTINGS] > “System” > “System Information”> “Firmware Version Information”≥ Downloading will require several minutes. It may takelonger or may not work properly depending on theconnection environment.≥ If you do not want to check for the latest firmware version,set “Automatic Update Check” to “Off”.[BDT270] [HOME] > “Setup” > “Player Settings” > “System” >“Firmware Update”[BD93] [SETTINGS] > “System” > “Firmware Update”SpecificationsFirmware UpdateCurrent Version: X.XXNew Version: X.XXDo you want to start firmware update?For the update information, please visit thefollowing website:http://panasonic.jp/support/global/cs/Yes NoOKRETURNThe firmware was updated.Current Version : x.xxRETURNPower supply[BDT270] AC 120 V, 60 Hz[BD93] DC 12 V, 0.8 A (DC INterminal)Powerconsumption[BDT270] Approx. 13 W[BD93] Approx. 11 WPowerconsumption instandby modeApprox. 0.5 WPower consumptionin quick startstandy mode[BDT270] Approx. 5 W[BD93] Approx. 3.5 WDimensions(WkHkD)[BDT270] 312 mmk43 mmk180 mm(Approx. 12 5/16zk1 11/16zk7 2/16z)[BD93] 245 mmk38.5 mmk175 mm(Approx. 9 10/16zk1 8/16zk6 14/16z)Mass (Weight) [BDT270] Approx. 1.0 kg (2.2 lbs)[BD93] Approx. 0.8 kg (1.7 lbs)until2014/12/23

/ 2

Related manuals for Panasonic DMP-BD93