PNQW3918YA CC1213WK1024Printed in MalaysiaConnectionsBase unit1 Run the telephone line cord ( ) and AC adaptor ( ) through the slot of the stand.2 Connect the telephone line cord ( ) and AC adaptor ( ) to the jacks at the bottom of the unit until youhear a click.3 Connect the AC adaptor to the power outlet.4 Connect the telephone line cord to the single-line telephone jack (RJ11C) until you hear a click.5 A DSL/ADSL filter (not supplied) is required if you have DSL/ADSL service.Note:L Use only the supplied Panasonic AC adaptor PNLV238.1 21 2235421121Charger1 Connect the AC adaptor plug to the charger untilyou hear a click.2 Connect the AC adaptor to the power outlet.Note:L Use only the supplied Panasonic AC adaptorPNLV233.12Model No. KX-PRL260/KX-PRD260KX-PRL262/KX-PRD262Quick GuidePRL262_PRD262_QG(en).fm Page 1 Tuesday, February 18, 2014 10:19 AM