Panasonic KX-TG2120 Operating Instructions Manual

Also see for KX-TG2120: Operating instructions

Contents

answering calls

Panasonic KX-TG2120 Operating Instructions Manual Manual pdf 1 page image

Ringer on/offYou can turn the ringer on/off. The default setting is “ON”.1 Press [FUNCTION] 5 times until “RINGER” is displayed.2 Select “ON” or “OFF” by using [] or [].3 Press [EDIT], then press [OFF].Note:• When the ringer is set to off, the handset does not ring for outsidecalls.Dialing modeIf you cannot make calls, change this setting according to your telephoneline service. The default setting is “TONE”.“TONE”: For tone dial service.“PULSE”: For rotary pulse dial service.1 Press [FUNCTION] 6 times until “DIAL MODE” is displayed.2 Select “PULSE” or “TONE” by using [] or [].3 Press [EDIT], then press [OFF].Note:• For KX-TG2122 users: When you change the dialing mode setting,make sure you change it on both handsets.Resetting the handset to its default settingFeature Default settingLanguage ENGLISHArea code ---Ringer tone RINGER TONE 1Ringer ONDial mode TONEDefault setting NOReceiver volume level Vol. 21 Press [FUNCTION] 7 times until “DEFAULT” is displayed.2 Select “YES” or “NO” by using [] or [].3 Press [EDIT].Introduction1 IntroductionThank you for purchasing a Panasonic cordless telephone.We recommend keeping a record of the following information for futurereference.Serial No. Date of purchase(found on the bottom of the base unit)Name and address of dealerAttach your purchase receipt here.4 Important safety instructionsWhen using the product, basic safety precautions should always befollowed to reduce the risk of fire, electric shock, or personal injury.1. Read all instructions carefully.2. Follow all warnings and instructions marked on the product.3. Unplug the product from power outlets before cleaning. Do not useliquid or aerosol cleaners. Use a moist cloth for cleaning.4. Do not use the product near water, for example near a bathtub, washbowl, kitchen sink, etc.5. Place the product securely on a stable surface. Serious damage and/orinjury may result if the product falls.6. Do not cover slots and openings on the product. They are provided forventilation and protection against overheating. Never place the productnear radiators, or in a place where proper ventilation is not provided.7. Use only the power source marked on the product. If you are not sureof the type of power supplied to your home, consult your dealer or localpower company.8. Do not place objects on the power cord. Install the product where noone can step or trip on the cord.9. Do not overload power outlets and extension cords. This can result inthe risk of fire or electric shock.10 Never push any objects through slots in the product. This may result inthe risk of fire or electric shock. Never spill any liquid on the product.11. To reduce the risk of electric shock, do not disassemble the product.Take the product to an authorized service center when service isrequired. Opening or removing covers may expose you to dangerousvoltages or other risks.Incorrect reassembly can cause electric shock when the product issubsequently used.12. Unplug the product from power outlets and take to an authorizedservice center when the following conditions occur:A. When the power cord is damaged or frayed.B. If liquid has been spilled into the product.C. If the product has been exposed to rain or water.D. If the product does not work normally by following the operatinginstructions. Adjust only controls covered by the operatinginstructions. Improper adjustment may require extensive work by anauthorized service center.E. If the product has been dropped or physically damaged.F. If the product exhibits a distinct change in performance.13. During thunderstorms, avoid using telephones except cordless types.There may be a remote risk of an electric shock from lightning.14. Do not use the product to report a gas leak, when in the vicinity of theleak.SAVE THESE INSTRUCTIONSCAUTION:Installation• Never install telephone wiring during a lightning storm.• Never install telephone jacks in wet locations unless the jack isspecifically designed for wet locations.• Never touch uninsulated telephone wires or terminals unless thetelephone line has been disconnected at the network interface.• Use caution when installing or modifying telephone lines.• Do not touch the plug with wet hands.• The AC adaptor is used as the main disconnect device. Ensure that theAC outlet is installed near the product and is easily accessible.BatteryTo reduce the risk of fire or injury to persons, read and follow theseinstructions.• Use only the battery(ies) specified.• Do not dispose of the battery(ies) in a fire. They may explode. Checkwith local waste management codes for special disposal instructions.• Do not open or mutilate the battery(ies).Released electrolyte is corrosive and may cause burns or injury to theeyes or skin. The electrolyte may be toxic if swallowed.• Exercise care when handling the battery(ies). Do not allow conductivematerials such as rings, bracelets or keys to touch the battery(ies),otherwise a short circuit may cause the battery(ies) and/or theconductive material to overheat and cause burns.• Charge the battery(ies) provided, or identified for use with the productonly, in accordance with the instructions and limitations specified in this manual.WARNING:• To prevent the risk of fire or electrical shock, do not expose the productto rain or any type of moisture.• Unplug the product from power outlets if it emits smoke, an abnormalsmell, or makes an unusual noise. These conditions can cause fire orelectric shock. Confirm that smoke has stopped emitting and contactthe Panasonic Call Center at 1-800-211-PANA (1-800-211-7262).Medical• Consult the manufacturer of any personal medical devices, such aspacemakers or hearing aids, to determine if they are adequatelyshielded from external RF (radio frequency) energy. (The productoperates in the frequency range of 911.171 MHz to 913.066 MHz and2480.0 MHz to 2482.9 MHz, and the power output is 1 mW (max.).) Donot use the product in health care facilities if any regulations posted inthe area instruct you not to do so. Hospitals or health care facilities maybe using equipment that could be sensitive to external RF energy.5 For best performanceBase unit location/avoiding noiseThe base unit and other compatible Panasonic units use radio waves tocommunicate with each other.For maximum distance and noise-free operation, we recommend thefollowing:• Placing the product away from electrical appliances.• Placing the base unit in a HIGH and CENTRAL location with noobstructions such as walls.• Raising the antenna vertically.• If you use the handset near a microwave oven which is being used,noise may be heard. Move away from the microwave oven and closerto the base unit.• If you use the handset near another cordless phone’s base unit, noisemay be heard. Move away from the other cordless phone’s base unitand closer to your base unit.Environment• Keep the product away from electrical noise generating devices, suchas fluorescent lamps and motors.• The product should be kept free from excessive smoke, dust, hightemperature, and vibration.• The product should not be exposed to direct sunlight.• Do not place heavy objects on top of the product.• When you leave the product unused for a long period of time, unplugthe product from the power outlet.• The product should be kept away from heat sources such as heaters,kitchen stoves, etc. It should not be placed in rooms where thetemperature is less than 5 °C (41 °F) or greater than 40 °C (104 °F).Damp basements should also be avoided.• The maximum calling distance may be shortened when the product isused in the following places: Near obstacles such as hills, tunnels,underground, near metal objects such as wire fences, etc.• Operating the product near electrical appliances may causeinterference. Move away from the electrical appliances.Routine care• Wipe the outer surface of the product with a soft moist cloth. Do not usebenzene, thinner, or any abrasive powder.Preparation6 Location of controlsBase unit HandsetAttention:A nickel cadmium battery that is recyclable powers theproduct you have purchased. At the end of its useful life,under various state and local laws, it is illegal to dispose ofthis battery into your municipal waste stream. Please call1-800-8-BATTERY (1-800-822-8837) for information on howto recycle this battery.Battery chargePlace the handset on the base unit or charger for about 12 hours beforeinitial use.• The CHARGE indicator lights.• Place each handset on the base unit once before initial use to activateall handsets.Base unit Charger (KX-TG2122 only)• To ensure that the battery charges properly, clean the charge contactsof the handset, base unit, and charger with a soft, dry cloth once amonth. Clean more often if the unit is subject to the exposure of grease,dust, or high humidity.Recharging the batteryRecharge the battery when:– “RECHARGE” is displayed, “ ” is displayed, or– the handset beeps intermittently while it is in use.Panasonic battery performanceOperation Operating timeWhile in use (talking) Up to 5 hoursWhile not in use (standby) Up to 5 daysNote:• Battery operating time may be shortened over time depending on usageconditions and surrounding temperature.• Battery power is consumed whenever the handset is off the base unit orcharger, even when the handset is not in use. Hence the longer you leavethe handset off the base unit or charger, the less time you may actuallytalk using the handset.• If the battery is fully charged, you do not have to place the handset onthe base unit or charger until “RECHARGE” and/or “ ”aredisplayed. This will maximize the battery life.9 Programmable settingsYou can customize the unit by programming the following features usingthe handset.Display languageYou can select English, Spanish, or French as the display language.The default setting is “ENGLISH”.1 Press [FUNCTION] 2 times until “LANGUAGE” is displayed.2 Select “ENG”, “ESP”, or “FRA” by using [] or [].3 Press [EDIT], then press [OFF].Area codeWe recommend storing your area code before using Caller ID. Calls from thesame area will be recorded in the caller list without the area code. You do nothave to remove it before calling back the caller or storing in the phonebook.1 Press [FUNCTION] 3 times until “AREA CODE” is displayed.2 Enter your area code (max. 3 digits).3 Press [EDIT], then press [OFF].Ringer toneYou can change the ringer tone heard when an outside call is received. Thereare 3 ringer tones. The default setting is “RINGER TONE 1”.1 Press [FUNCTION] 4 times until “RINGER TONE” is displayed.2 Select the desired ringer tone by using [] or [].3 Press [EDIT], then press [OFF].Note:• The following items are retained:– Redial– Caller list– Phonebook itemsMaking/Answering calls10 Making calls1 Lift the handset and dial the phone number.• To correct a digit, press [CLEAR].2 Press [ ].3 When you finish talking, press [OFF] or place the handset on the baseunit or charger.Note:• If an alarm tone sounds in step 2, move closer to the base unit or placethe handset on the base unit, and try again.• If additional dialing is necessary after using speed dialing functionssuch as phonebook dialing or REDIAL, wait until speed dialing isfinished to continue further dialing. Otherwise, the unit may not dialproperly.If noise interferes with the conversationPress [CH] to select a clearer channel while talking or move closer to thebase unit.To redial after confirming the last number dialedPress [REDIAL], then press [ ].To select the receiver volumePress VOL. [] or [] repeatedly while talking.To mute your conversationPress [MUTE], while talking.• The other party cannot hear you but you can hear them.• To return to the conversation, press [MUTE].Operating Instructions2.4 GHz Cordless PhoneModel No. KX-TG21202.4 GHz Cordless Phone with Two HandsetsModel No. KX-TG2122Model shown is KX-TG2120.This unit is compatible with Caller ID. To use this feature, you mustsubscribe to the appropriate service offered by your telephone serviceprovider.Charge the handset battery for 12 hours before initial use.Place each handset on the base unit once before initial use to activate allhandsets.Please read these Operating Instructions before using the unit and save forfuture reference.For assistance, visit our website:http://www.panasonic.com/phonehelp for customers in the U.S.A. orPuerto Rico.If you need assistance with setup oroperation1 Visit our website: http://www.panasonic.com/phonehelp2 Contact us via the web at: http://www.panasonic.com/contactinfo3 Call us at: 1-800-211-PANA (1-800-211-7262) or 1-800-833-9626TTY users (hearing or speech impaired users) can call 1-877-833-8855.When you ship the product• Carefully pack your unit, preferably in the original carton.• Attach a letter, detailing the symptom, to the outside of the carton.• Send the unit to Panasonic Services Company Customer Servicenter, prepaidand adequately insured.• Do not send your unit to Panasonic Consumer Electronics Company listed belowor to executive or regional sales offices. These locations do not repair consumerproducts.PQQX15577YABlackLeadRedLead2 About these operating instructionsNotable differences between KX-TG2120 and KX-TG2122These operating instructions can be used for the following models:KX-TG2120 features 1 handset.KX-TG2122 features 2 handsets.Important:• References in these operating instructions to “a charger” or “anotherhandset” are for KX-TG2122 users only.Symbols used in these operating instructionsSymbol Meaning[ ]: button name The words in the brackets indicate buttonExample: names on the handset and base unit.Unit keys: [ ] , [OFF]Example: The words in quotations indicate the menu on the“LANGUAGE” display.Handset : Press up or down on the handset CID/VOL. button.[] []Note:• The AC adaptor must remain connected at all times. (It is normal for theadaptor to feel warm during use.)• The AC adaptor should be connected to a vertically oriented orfloor-mounted AC outlet.Do not connect the AC adaptor to a ceiling-mounted AC outlet, as theweight of the adaptor may cause it to become disconnected.• The unit will not work during a power failure. We recommendconnecting a corded telephone to the same telephone line or to thesame telephone jack using a Panasonic T-adaptor.If you subscribe to a DSL servicePlease attach a noise filter (contact your DSLprovider) to the telephone line between the baseunit and the telephone line jack in the event of thefollowing:– Noise is heard during conversations.– Caller ID features do not function properly.8 Setting up the handsetConnecting the charger (KX-TG2122 only)Battery installation/replacementInsert the battery plug into the connector as shown in the picture. Thenclose the handset cover.• If the battery replacement is necessary, press the notch of the handsetcover firmly, and slide it. And then, remove the old battery.Important:• Use only the rechargeable Panasonic battery.For assistance, please visit http://www.panasonic.com/phonehelp For assistance, please visit http://www.panasonic.com/phonehelpPanasonic Consumer Electronics Company,Division of Panasonic Corporation of North AmericaOne Panasonic Way, Secaucus, New Jersey 07094Panasonic Puerto Rico, Inc.San Gabriel Industrial Park, Ave. 65 de Infantería, Km. 9.5,Carolina, Puerto Rico 00985CopyrightThis material is copyrighted by Panasonic Communications Co., Ltd., and may bereproduced for internal use only. All other reproduction, in whole or in part, isprohibited without the written consent of Panasonic Communications Co., Ltd.© 2006 Panasonic Communications Co., Ltd. All Rights Reserved.3 Accessory informationIncluded accessoriesAntennaReceiverDisplay[CID] [VOL.][EDIT][TRANSFER]*1[OFF][AUTO] [FUNCTION][CH] (Channel)[MUTE] [CLEAR][ ] (TONE)[ ] (TALK) [FLASH][PAUSE] [REDIAL]*MicrophoneTONE7 Setting up the base unitConnecting the AC adaptor and telephone line cord• Use only the included Panasonic AC adaptor PQWATG2120M.Additional/replacement accessoriesAccessory item Order numberRechargeable battery P-P504 or HHR-P501Headset KX-TCA86, KX-TCA88HA,KX-TCA91, or KX-TCA92T-adaptor KX-J66Sales and support information• To order additional/replacement accessories, call 1-800-332-5368.• TTY users (hearing or speech impaired users) can call 1-866-605-1277.(1) (5)(4)(3)(2)Charger (KX-TG2122 only)Noise filterTo single-linetelephonejack (RJ11C)To single-linetelephonejack (RJ11C)Noise filterFor assistance, please visit http://www.panasonic.com/phonehelp(120 V AC, 60Hz)No. Accessory item Order number(1) AC adaptor PQWATG2120M 1 1(2) Telephone line cord PQJA10075Z 1 1(3) Battery P-P504 1 2(4) Handset cover PQYNTG2120W 1 2(5) Charger PQWETGA211W - 1*1 KX-TG2122 onlyAntenna[LOCATOR]IN USE indicatorCHARGE indicatorCHARGE indicatorQuantityKX-TG2120W KX-TG2122WTo single-linetelephone jack(RJ11C)(120V AC, 60Hz)Hook

/ 2

Related manuals for Panasonic KX-TG2120