Panasonic WV-CF212E Series Operating Instructions Manual

Panasonic WV-CF212E Series Operating Instructions Manual Manual pdf 1 page image

1. Do not attempt to disassemble the camera.To prevent electric shock, do not removescrews or covers.There are no user-serviceable parts inside.Ask qualified service personnel for servicing.2. Handle the camera with care.Do not abuse the camera. Avoid striking,shaking, etc. The camera could be damagedby improper handling or storage.3. Do not expose the camera to rain ormoisture, or try to operate it in wet areas.Turn the power off immediately and ask quali-fied service personnel for servicing. Moisturecan damage the camera and also create thedanger of electric shock.4. Do not use strong or abrasive detergentswhen cleaning the camera body.Use a dry cloth to clean the camera whendirty.In case the dirt is hard to remove, use a milddetergent and wipe gently. Afterwards, wipeoff the remained part of the detergent in itwith a dry cloth.5. Clean the lens faceplate with care.Do not clean the lens with strong or abrasivedetergents. Use lens tissue or a cotton tippedapplicator and ethanol.6. Never face the camera towards the sun.Do not aim the camera at bright objects.Whether the camera is in use or not, neveraim it at the sun or other extremely brightobjects. Otherwise, blooming or smear maybe caused.7. Do not operate the camera beyond thespecified temperature, humidity or powersource ratings.Use the camera under conditions where tem-perature is between –10 °C to +50 °C (14 °F to122 °F), and humidity is below 90 %. Theinput power source is 12 V DC, 240 mA.8. It is recommended to use a monitor whoseresolution is at least equal to that of thecamera.PRECAUTIONS+12V–+12 V-qwerouiyt AP SoftAP SharpBLC OFFBLC ON ON1 2MAJOR OPERATING CONTROLS AND THEIR FUNCTIONSq Camera Panelw Panning/Tilting/Azimuth TableAdjusts the panning/tilting angle of the cam-era.e Focus LeverFixes the focus position after adjusting.r Zoom LeverFixes the zoom position after adjusting.t Video Output TerminalConnects to the video input connector of amonitor.y DC 12 V Input TerminalConnects to the 12 V DC, 240 mA power sup-ply. Connection should be made in accor-dance with the !/@ signs of PCB.u Back Light Compensation Mode Selector(BLC ON, OFF)ON: Select this when the brightness level ofthe background is higher than theobject.OFF: Select this when you can view theobject without backlight.The factory default setting is OFF.i Aperture Level Selector (AP Sharp/Soft)Sharp: Sharpens the image outline.Soft: Softens the image outline.The factory default setting is Sharp.Note: Set the selector to Soft when a quadsystem is connected to this camera.o Video Jack (3.5 diam. mini jack)Connect the LCD monitor and such deviceswith 3.5 diam. 2-pole L-type plug for check-ing images.!0 Panel Cover!0Caution: CONNECT THIS TO 12 V DC(10.5 V TO 16 V) CLASS 2 POWERSUPPLY ONLY.PREFACEPanasonic’s WV-CF212E series digital signal pro-cessing colour CCD cameras uses a 1/4-inchinterline transfer CCD image sensor having 752horizontal pixels (picture elements), and digitalsignal processing LSI’s. This model is designedfor video surveillance.The lightning flash with arrowheadsymbol, within an equilateral trian-gle, is intended to alert the user tothe presence of uninsulated "dan-gerous voltage" within the product'senclosure that may be of sufficientmagnitude to constitute a risk ofelectric shock to persons.The exclamation point within anequilateral triangle is intended toalert the user to the presence ofimportant operating and mainte-nance (servicing) instructions in theliterature accompanying the appli-ance.The serial number of this product may be found on the bottom of the unit.You should note the serial number of this unit in the space provided and retain this instruction as a permanentrecord of your purchase to aid identification in the event of theft.Model No. WV-CF212ESerial No.WARNING: To prevent fire or electric shock hazard, do not expose this appliance to rain or moisture.The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such asvases, shall be placed on the apparatus.CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT REMOVE COVER (OR BACK).NO USER-SERVICEABLE PARTS INSIDE. REFER SER-VICING TO QUALIFIED SERVICE PERSONNEL.CAUTIONRISK OF ELECTRICSHOCK DO NOT OPEN Wij verklaren als enige aansprakelijke, dat het prod-uct waarop deze verklaring betrekking heeft, voldoetaan de volgende normen of andere normatieve docu-menten, overeenkomstig de bepalingen vanRichtlijnen 73/23/EEC en 89/336/EEC.Vi erklærer os eneansvarlige for, at dette produkt,som denne deklaration omhandler, er i overensstem-melse med standarder eller andre normative doku-menter i følge bestemmelserne i direktivene73/23/EEC og 89/336/EEC.Vi deklarerar härmed värt fulla ansvar för att den pro-dukt till vilken denna deklaration hänvisar är iöverensstämmelse med standarddokument, ellerandra normativa dokument som framstölls i EEC-direktiv nr. 73/23 och 89/336.Ilmoitamme yksinomaisella vastuullamme, että tuote,jota tämä ilmoitus koskee, noudattaa seuraavia stan-dardeja tai muita ohjeellisia asiakirjoja, jotka noudat-tavat direktiivien 73/23/EEC ja 89/336/EECsäädöksiä.Vi erklærer oss alene ansvarlige for at produktet somdenne erklæringen gjelder for, er i overensstemmelsemed følgende normer eller andre normgivende doku-menter som følger bestemmelsene i direktivene73/23/EEC og 89/336/EEC.We declare under our sole responsibility that theproduct to which this declaration relates is in confor-mity with the standards or other normative documentsfollowing the provisions of Directives EEC/73/23 andEEC/89/336.INSTALLATIONS46 mm(1.81")83.5 mm (3.29")Front / UpperCable access hole35° 6-ø4.5(0.18")ø130 (5.12")Installation dimensional drawingWARNING• The following installation should be made by qualified service personnel or system installers andshould confirm to all local codes.• Be sure to use a ceiling board/wall having enough strength to support this camera.■ Camera mounting positionNotes:• Remove the panel cover before the mounting procedure. (Refer to Step 1 to 4 of "How to mount thecamera" on the next page.)• Procure four mounting screws locally.To mount the camera on a junction boxNote: If you mount the camera on a junction box, procure one locally that meets the dimensions in the fig-ure below.1. Install the junction box to the wall/ceiling.2. Attach the four mounting screws to the junction box.3. Fix the camera and the junction box. Then, turn the camera clockwise.4. Fasten all the mounting screws.To mount the camera directly on the wall/ceiling1. Cut out the panel according to the concave.(Refer to the figure on the right.)2. Prepare a space, which is ø155 mm (6.1") orlarger, on the wall/ceiling.3. Attach the four mounting screws to thewall/ceiling. (Refer to "Installation dimensionaldrawing".)4. Fix the camera and the wall/ceiling. Then,turn the camera clockwise.5. Fasten all the mounting screws.Camera mounting screw x 4Shown figure is anexample for junction box. 46 mm(1-13/16")83.5 mm(3-5/16")Before attempting to connect or operate this product,please read these instructions carefully and save this manual for future use.Ns0902-2043 3TR001235CAA Printed in ChinaColour CCTV CameraOperating InstructionsModel No. WV-CF212E

/ 2

Related manuals for Panasonic WV-CF212E Series