INSTALLATION1. Set the ALC selector on the camera to DC position.2. Mount the lens by turning it clockwise on the lens mount of thecamera.3. Connect the lens cable to the Auto Iris Lens Connector on the sideof the camera.ADJUSTMENT1. Loosen the Focus Lock Screw by turning it counterclockwise, andthen set this screw to the "F" position.2. Turn the Zoom Ring toward the "W" until it stops.Before attempting to connect or operate this product,please read these instructions carefully and save this manual for future use.Model No. WV-LZ62/8SVari-focal LensInstructions3. Shoot an object more than 10 m (30 feet) away to adjust theflange-back of the camera.4. Turn the Zoom Ring to a point between "T" and "W" to choose thedesired angular field of view.5. Bring the desired object into focus by setting the Focus LockScrew.6. Tighten the Focus Lock Screw by turning it clockwise.SPECIFICATIONSImage size: ø6 mm [4.8 mm (H) x 3.6 mm (V)]Focal length: 5 - 40 mmMaximum aperture ratio: 1:1.6 (Wide), 1:1.9 (Tele)Angular field of viewH: 6.6° - 52°V: 5.0° - 39.6°Focusing range: 1.2 m - ∞ (3.9 ft - ∞)Mount: CS-mount, 1"-32UNAmbient operatingtemperature: –10°C - +50°CDimensions: 61 (W) x 52 (H) x 65 (D) mm2-3/8" (W) x 2-1/16" (H) x 2-9/16" (D)Weight: 110 g (0.24 lbs.)Weight and dimensions indicated are approximate.Specifications are subject to change without notice.N1004-0 3TR003329AAA Printed in Japan8X TV LENS5 ~ 40 mm 1:1.6WV-LZ62/8STWFN13Focus lock screwZoom ring8XTWFN13TV LENS5 ~ 40 mm 1:1.6WV-LZ62/8STurnENGLISH VERSION