Panasonic WV-NP1000 Series Manual

Also see for WVNP1000 - NETWORK CAMERA: Integration note Network operating instructions Operating instructions Operating instructions

Contents

specifications

Panasonic WV-NP1000 Series Manual Manual pdf 1 page image

Mega-Pixel MPEG-4/JPEG dual streaming network cameraKey FeaturesStandard Accessories• CD-ROM* .......................................1 pc.• Operating Instructions(English version) ........................... 1 pc.• ALC lens connector cap ............... 1 pc.• Power cord(only for the WV-NP1000) ............. 1 pc.The following is for the installation.• Cord label ..................................... 1 pc.* The IP setting software, the viewer software andthe network operating instructions (PDF) areincluded on the CD-ROM.• MPEG-4/JPEG digital signal output at VGA image size with up to 30 ips.• MPEG-4 and JPEG dual stream output for simultaneous livemonitoring and high resolution recording.• Progressive output provides clear images, even when the subject ismoving.• High sensitivity with Day-Night function: 1.0 lux (Color), 0.06 lux(B/W) at F1.4.• Adaptive Digital Noise Reduction: 2D-DNR and 3D-DNR integrationensures reduced noise in various conditions.• Electronic sensitivity enhancement: Auto (Up to 10x) / Manual (Up to 32x).• Electronic shutter: Up to 1/10,000 sec.• Video Motion Detector with 4 programmable detection areas and 3sensitivity levels.• Up to 8 Privacy zones• Auto image stabilizer for applications where vibration or wind is a concern.• Flexible digital zoom and pan/tilt operation: Up to 5x variable digitalzoom and pan/tilt can be set in the setup menu or controlled by asystem controller (effective both for analog and network video).2x or 4x digital zoom and pan/tilt can be controlled by the browserGUI for network video.• Internal / Multiplexed Vertical Drive (VD2) synchronization.• Camera title displays: Up to 16 (OSD) and 20 (on browser)alphanumeric characters.• SD Memory card slot for alarm recording and backup upon networkfailure. Recorded dada can be downloaded by using FTP command.• Auto Back Focus (ABF) ensures easy installation and stable focus inboth color and B/W modes.• Alarm sources including Terminal input, VMD and Panasonic alarmcommand can trigger actions including SD memory recording/FTPimage transfer, E-mail notification, Alarm indication, Terminal outputand Panasonic protocol output.• Built-in microphone for audio (one-way).• Built-in network interface (10Base-T / 100Base-TX).• Multiscreen: Images from 8 cameras can be displayed in twoseparate Quad screens (JPEG only). 20 characters camera title isavailable for each camera.• FTP client function enables periodic image data transfer or transferupon alarm.• Alarm e-mail notification• Max bit rate/client for MPEG-4 (64 / 128 / 256 / 512 / 1,024 / 1,536 /2,048 / 3,072 / 4,096 kbps) combined with Total bit rate control (64 /128 / 256 / 512 / 1,024 / 2,048 / 4,096 kbps / 10 Mbps / Unlimited)allowing flexible network management.• Supported Protocol: TCP/IP, UDP/IP, HTTP, FTP, SMTP, DHCP,DNS, DDNS, NTP, RTP and SNMP.• Multi-language GUI and setup menu: English, French, Italian,Spanish, German, Chinese, Russian (PAL), English, French(NTSC), (Installation required except for English).Mega-PixelDay-Night Network CameraWV-NP1000 SeriesWV-NP1004 (24V AC) WV-NP1000 (220V ~ 240V AC)WV-NP1004 (24V AC)Optional Accessory1/3-type 2x Varifocal LensWV-LZA62/2(2.8 ~ 6 mm)F1.4 (wide)F2.1 (tele)Lens: optional

/ 2

Related manuals for Panasonic WVNP1000 - NETWORK CAMERA