Panasonic WV-SC384 Specifications

Also see for WV-SC384: Integration note Product catalog Installation guide Operating instructions Operating instructions

Contents

Panasonic WV-SC384 Specifications Manual pdf 1 page image

HD Dome Network CameraWV-SC384HD/1,280 x 960 H.264 PTZ Dome Network Camera.Key Features• 720p HD images up to 30 fps• Newly developed 1.3 Megapixel MOS Sensor• Multiple H.264 (High profile) streams and JPEG streams ensuresimultaneous real time monitoring and high resolution recording by“UniPhier®”, Panasonic’s proprietary System LSI platform.• Full frame (Up to 30 fps) transmission at 1,280 x 960 image size• 18x optical zoom. 36x extra optical zoom at VGA resolution with 8xdigital zoom enabling 288x zoom.• Wide Dynamic Range and ABS (Adaptive Black Stretch) technologiesdeliver wider dynamic range compared with conventional cameras.• Face Wide Dynamic Range technology ensures clear face image.• H.264 and MPEG-4 are selectable for system migration.• High sensitivity with Day/Night function : 0.6 lx (Color), 0.5 lx (B/W) at F1.6 (Wide)• Adaptive Digital Noise Reduction: 2D-DNR and 3D-DNR integrationensures reduced noise and motion blur in various conditions.• Superior color reproduction by primary (RGB) color filter• Electronic sensitivity enhancement: Auto (Up to 16x) / OFF• Selectable light control modes: Outdoor / Indoor / Fixed electronic shutterOutdoor / Indoor: Electronic shutter and ALC lens iris control areautomatically controlled depending on the mode and luminance level.Fixed electronic shutter: Up to 1/10,000 fixed electronic shutter can be selectable.• Panning with auto flip function can be performed 0 to 360 degrees.• PTZ control can be taken on the user friendly GUI with 16 speedspan/tilt and new “Drag and Zoom” operation enabling finer control.256 speeds available for system with WV-CU950 system controller.• Up to 64 preset positions• 360 map shot: 8 thumbnail images at 45 deg. intervals make itsimple to direct the camera easily by clicking on a thumbnail.• Industrial grade Pan/Tilt/Zoom mechanism for high reliability• VMD (Video Motion Detector) with 4 programmable detection areas,15 steps sensitivity level and 10 steps detection size• Face detection function detects the position of human face and theinformation is sent by XML or video stream.• Meta data for VMD is supplied to work with the WJ-ND400 playback VMD function.• Privacy Zone can mask up to 2 private areas, such as housewindows and entrances/exits.• Alarm sources including 3 terminal input, VMD and Panasonicalarm command can trigger actions such as SDHC/SD memoryrecording, FTP image transfer, E-mail notification, Indication onbrowser, Alarm terminal output, and Panasonic protocol output.• Full duplex bi-directional audio allows interactive communicationbetween camera site and monitoring site.• JPEG image compression ratio can be changed by alarm so thathigher quality image can be provided.• Prioritized stream control: One of the video streams can be prioritizedwhen multiple recorders or client PCs are accessing the camera sothat the recorder or the client PC can maintain the frame rate.• SDHC/SD Memory card slot for manual recording (H.264 / JPEG), alarmrecording (H.264 / JPEG) and backup upon network failure (JPEG)• H.264/MPEG-4 max. bit rate/client and Total bit rate control allowsflexible network traffic management. Frame rate priority mode controlsbit rate and compression ratio to provide the specified frame rate.• Multi-language GUI and setup menu: English, French, Italian, Spanish,German, Russian (PAL) / English, French (NTSC) * Installation required except for English• IPv4/IPv6 protocol supported• Analog Monitor output for easier installation• Supports SSL, DDNS (viewnetcam, RFC2136)• Still images (JPEG) can be viewed on mobile phones via Internet.• ONVIF compliant modelStandard Accessories• CD-ROM*1 .....................................1 pc.• Installation Guide ...........................1 pc.The followings are for installation.• Camera Mount Bracket (w/safety wire).......................................................1 pc.• Camera Fixing Screw............................. 2 pcs. (incl. 1 spare)• Decorative Cover...........................1 pc.• Power Cable Plug ..........................1 pc.• Code Label* 2 .................................1 pc.*1 The CD-ROM contains the operating instructions(PDFs) and different kinds of tool software programs.*2 This label may be required for network management.The network administrator shall retain the code label.Optional AccessoriesIndoor Dome CoversWV-Q156C(Clear)WV-Q156S(Smoke)Inner Dome CoverWV-Q157Wall Mount BracketsWV-Q154C (Clear)WV-Q154S (Smoke)Ceiling Mount BracketWV-Q105(Smoke Type)(Smoke Type)(Smoke Type)Embedded Ceiling Mount BracketsWV-Q155C(Clear)WV-Q155S(Smoke)* Not compatible with optional accessories of conventional cameras

/ 2

Related manuals for Panasonic WV-SC384