Zener DiodesPublication date: January 2009 SKE00030CED 1This product complies with the RoHS Directive (EU 2002/95/EC).MAZQxxx SeriesSilicon planar typeFor constant voltage, constant current, waveform clipper and surgeabsorption circuit Features Optimum for high-density mounting Low noise type Absolute Maximum Ratings Ta = 25°CParameter Symbol Rating UnitRepetitive peak forward current IFRM 200 mATotal power dissipation * PT 120 mWJunction temperature Tj 150 °CStorage temperature Tstg -55 to +150 °CNote) *: P T = 120 mW achieved with a printed circuit board. Electrical Characteristics Ta = 25°C±3°CParameter Symbol Conditions Min Typ Max UnitForward current VF IF = 10 mA 0.9 1.0 VZener voltage * VZ IZ Specified value Refer to the list of theelectrical characteristicswithin part numbersVZene operating resistance RZ IZ Specified value WReverse current IR VR Specified value mANote) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes.2. Absolute frequency of input and output is 5 MHz.3. The temperature must be controlled 25°C for V Z mesurement. V Z value measured at other temperature must be adjusted to V Z (25°C)4. *: V Z guaranted 20 ms after current flow. Electrical Characteristics within Part Numbers Ta = 25°C±3°CPart numberZener voltageVZ (V)ZeneroperatingresistanceRZ (W)Reverse currentIR ( mA) Marking symbolMin Typ Max IZ(mA) Max IZ(mA) Max VR(V)MAZQ062 5.8 6.2 6.6 5 30 5 0.2 4.0 EMAZQ068 6.4 6.8 7.2 5 20 5 0.1 4.0 FMAZQ100 9.40 10.00 10.60 5 30 5 0.05 7 LMAZQ200 18.80 20.00 21.20 5 80 5 0.05 15.0 VMAZQ300 28.00 30.00 32.00 2 160 2 0.05 23.0 Y Package CodeUSSMini2-F1 Pin Name1: Anode2: Cathode Marking SymbolRefer to the list of the electrical characteristicswithin part numbers