INSTALLATION INSTRUCTIONS PN155B© Panduit Corp. 2006For Technical Support: www.panduit.com/resources/install_maintain.aspPage 1 of 4OPTICOM Furcation KitPart Numbers: FK2BJ, FK4BJFK4BJINCLUDES: FOUR 1-METER FURCATION TUBES ANDONE 3” X3/8” DIAMETER HEAT SHRINK TUBEFK2BJINCLUDES: TWO 1-METER FURCATIONTUBES AND ONE 3” X1/4” DIAMETERHEAT SHRINK TUBECONTENTSORTOOLSCABLE JACKETSTRIPPER (CST-115)ARAMID YARNCUTTER (FKC)HEAT GUN(HSG-115V-300)MARKING PEN(PFX-0)UTILITY KNIFETAPE MEASUREPRECAUTIONS1. SAFETY GLASSESWARNING: It is strongly recommended thatsafety glasses be worn when handling bareoptical fiber. The bare fiber is very sharp andcan easily damage the eye.2. DISPOSAL OF BARE FIBERSWARNING: Pick up and discard all pieces ofbare fiber with sticky tabs. Do not let cut piecesof fiber stick to clothing or drop in the workarea where they are hard to see and cancause injury.3. LASER LIGHT PROTECTIONWARNING: Laser light is invisible. The invisi-ble light is powerful enough to damage youreyes. Serious damage to the retina of the eyeis possible. Never look into the end of a fiberwhich may have a laser coupled into it. Shouldaccidental eye exposure to laser light be sus-pected, arrange for an eye examination imme-diately.4. CABLE HANDLINGWARNING: Fiber optic cable can be damagedby excessive pulling, twisting, crushing orbending stresses. Consult the appropriatespecification sheets as provided by your cablevendor. Any damage may result in decreasedoptical performance.