TM17915-A2-GK41-00 March 1998Hotwire 7915-A1 E1 SDSL Standalone Termination UnitErrataDocument Number 7915-A2-GK41-00March 1998Errors and exclusions in theHotwire Model 7915 Standalone E1 SDSL Termination Unit User’s Guide(Document No. 7915-A2-GB20-20) were detected after printing. Please make note of the followingcorrection.The following information should be included on page B-3:E1 Network 120 Ohm Connection CablePin AssignmentsThe 120 ohm modular connector that plugs into the rear panel ofG.703-compatible units has the following pin assignments.Pin Signal1 Tx Ring2 Tx Tip3 unused4 Rx Ring5 Rx Tip6 – 8 unusedNOTE:Pin 1 is on the left when viewing the jack from its inserted position. *7915–A2–GK41–00*

Paradyne 7915-A1 E1 SDSL Errata