Paradyne Application Module 9109 OCU-DP Installation Instructions Manual

Contents

Paradyne Application Module 9109 OCU-DP Installation Instructions Manual Manual pdf 1 page image

TM19109 OCU-DP Application Module (APM)Installation InstructionsDocument Number 9109-A2-GN15-10May 1999Product Documentation on the World Wide WebWe provide complete product documentation online. This lets you search thedocumentation for specific topics and print only what you need, reducing the waste ofsurplus printing. It also helps us maintain competitive prices for our products.Complete documentation for this product is available at www.paradyne.com.SelectLibrary →Technical Manuals →NextEDGE Multiservices Access System.Select the following document:9191-A2-GH30NextEDGE Multiservices Access System Technical ReferenceTo request a paper copy of a Paradyne document: Within the U.S.A., call 1-800-PARADYNE (1-800-727-2396) Outside the U.S.A., call 1-727-530-8623Before You BeginMake sure you have: The housing, and any associated hardware already installed A T1 NAM already installed in Slot 01 and connected to the network Applicable cables A small Phillips screwdriver (#1 or #2) to install the APM A small, flat-blade screwdriver to install the I/O card and cable connectionsSee the Technical Reference for additional information on:TroubleshootingTechnical SpecificationsCables, Connectors, and Pin Assignments