Paradyne Hotwire 7996 Quick Installation Instructions

Also see for 7996-A2-374: User guide

Paradyne Hotwire 7996 Quick Installation Instructions Manual pdf 1 page image

7996-A2-374 SHDSL-G.703 NTUQuick Installation InstructionsDocument Number 7996-A2-GZ10-00September 2004Installation➊ Connect the LINE port to your DSL line with an RJ45connector cable.➋ Connect the E1 interface to the data network usingtwo cables with BNC connectors for a 75 ohmunbalanced E1 connection, or an RJ45 connectorcable for a 120 ohm balanced E1 connection.➌ Connect the LAN port to the SNMP managementnetwork with an RJ45 connector cable.➍ Connect the Console port to a VT100-compatibleterminal or PC COM port with an RS232 cable.➎ Connect the Power to the power input.For the DC version:• –48V: Connect to –48 VDC power supply source.• PG: Connect to the ground of –48 VDC powersupply source.• FG : Connect to the frame ground.For the AC version, connect the Power jack to thepower cable of the 110 or 220 VAC power adapter.It can take a couple of minutes for the NTU to link up withits partner unit.The link is up when the DSL LOSindicator LED is off. See the User’s Guide formanagement and troubleshooting information. !"#$"%&&'($ !)Copyright © 2004 Paradyne Corporation. Printed in U.S.A.

/ 1

Related manuals for Paradyne 7996-A2-374