Web Site: www.parallax.comForums: forums.parallax.comSales: sales@parallax.comTechnical: support@parallax.comOffice: (916) 624-8333Fax: (916) 624-8003Sales: (888) 512-1024Tech Support: (888) 997-8267Copyright © Parallax Inc. XBee Adapter Board (#32403) v1.1 3/4/2010 Page 1 of 4XBee Adapter Board (#32403)This low cost XBee Adapter Board comes in a kit form and provides a cost-effective solution to interfacingto any XBee or XBee Pro module. By using this adapter board you can provide an easy interface to theXBee or XBee Pro modules by converting the 2mm pin spacing to breadboard friendly 0.100” spacing.The adapter boards also provide a means to connect pluggable wires or solder connections and alsoprovide mounting holes.Features Converts XBee 2mm pin spacing to 0.100” pin spacing Provides easy pluggable wire or solder connections Includes mounting holes Pin-out compatible with our other XBee Adapter boards Kit form for flexible configurationKey Specifications Power requirements: 3.3V pass-through to XBee module Communication: Serial pass-through to XBee module Operating temperature: -40 to +185°F (-40 to +85°C) Dimensions: 1.16” L x 1.00” W x 0.58” H* (29.4 mm x 25.6 mm x 14.8 mm*)* when headers are attachedApplication Ideas Easy connection of XBee modules to breadboard or proto board Convenient way to mount the XBee module away from the microcontrollerPacking List (1) XBee Adapter Board PCB (2) 10-pin 2mm sockets (1) 40-pin SIP headerTools Required Soldering Iron (always wear safety glasses when soldering) Solder (some soldering experience required) Flux (if not using rosin/flux-core solder) Diagonal cutters or Exacto knife (optional)