AC10 seriesQuick-Start GuideIP20 0.25 - 250 HP (0.2 - 180 kW)IP66 0.5 - 125 HP (0.4 - 90 kW)AC10 Expanded Quick-Start GuideHA474130U002 Issue 1

Parker AC10 series Quick Start Manual

Chapter 1 Introduction

Product Range

Chapter 2 Product Overview

Control Features

Chapter 3 Installation

Inverters Installed in a Control Cabinet

Chapter 4 Maintenance

Chapter 5 The Keypad

Keypad Layout

Chapter 6 The Menu Organisation

Function Codes Switchover in/between Code-Groups

Panel Display

Chapter 7 Installation & Connection

Measurement of Main Circuit Voltages, Currents and Powers

Functions of Control Terminals

Wiring for Digital Input Terminals:

Wiring for active drain electrode (PNP mode)

Connection Overview

Basic methods of suppressing the noise

Field Wire Connections

Leakage Current

Application of Power Line Filter

Chapter 8 Operation and Simple Running

Keypad Panel and Operation Method

Switching of the parameters displayed under stopped status

Operation process of simple running

Illustration of Basic Operation

and reverse running, and stopping inverter through control terminals

Operation process of jogging operation using the keypad panel

Setting the frequency with analog terminal and controlling the operation with control terminals

Chapter 9 Function Parameters

Operation Control

Multifunctional Input and Output Terminals

Digital multifunctional input terminals

Analog input monitoring

Analog Input and Output

Multi-stage Speed Control

Auxiliary Functions

Malfunction and Protection

Motor Parameters

Communication Parameter

Torque Control Parameters

Chapter 11 Technical Specifications

Chapter 12 Modbus Communication

Frame structure:

Protocol Converter

Running Status Parameters

Control commands

Illegal Response When Reading Parameters

Function Codes Related to Communication

Physical Interface

Examples

Chapter 13 The Default Applications

Application 1: Basic Speed Control (Default)

Application 2 : Auto/Manual Control

Application 3: Preset Speeds

Application 4 : Raise/Lower Trim

Application 5: PID

Chapter 14 Compliance

European Compliance

EMC Compliance

Radiated

Fuse Ratings

Terminal Wiring Information

AC10 series

Minimum Air Clearance

Panel Mounting Dimensions

Chapter 6 The Menu Structure

Connection

Power Terminals

Wiring for positive Sink electrode (PNP mode) -- Switch J7 set for PNP

Terminal Tightening Torques

Basic Methods of Suppressing the Noise

Switching of the parameters displayed under running status

Setting the frequency using the keypad panel, and starting, forward and reverse running, and stopping inverter through control terminals

Torque control parameters

Application 1: Basic Speed Control (F228 = 1)

Application 2 : Auto/Manual Control (F228 = 2)

Application 3: Preset Speeds (F228 = 3)

Application 4 : Raise/Lower Secondary (F228 = 4)

Application 5: PID (F228 = 5)

EMC Standards Comparison

North American & Canadian Compliance Information (Frame

DECLARATION OF CONFORMITY

Chapter 1 English

QUICKSTART

COMPLIANCE

Chapter 2 Deutsch

SCHNELLSTARTANLEITUNG

KONFORMITÄT

Chapter 3 Français

DÉMARRAGE RAPIDE

CONFORMITÉ

Chapter 4 Italiano

GUIDA RAPIDA

CONFORMITÀ

Chapter 5 Polski

INSTRUKCJA SZYBKIEGO URUCHOMIENIA

INFORMACIÓN DE SEGURIDAD

INICIO RÁPIDO

SÄKERHETSINFORMATION

SNABBSTART

INSTALLATIONSKRAV

Chapter 8 中文

Chapter 9 Dimensions for Installations

Chapter 10 Applications