Parker Racor 200 Series Installation Instructions Manual

Parker Racor 200 Series Installation Instructions Manual Manual pdf 1 page image

RK 24008200 Series Checkball KitProductInformation:200 Series checkballs aremade with a high-performancefluorocarbon (FKM) material thatoffers outstanding chemicaland heat resistance properties,compression set, and compatibilitywith petroleum based oils, fuels,and biodiesels.Instruction Part Number 14380 Rev -Contact Information:Parker Hannifin CorporationRacor DivisionP.O. Box 32083400 Finch RoadModesto, CA 95353phone 800 344 3286209 521 7860fax 209 529 3278racor@parker.comwww.parker.com/racorThe engine should be off and coolto the touch.In a counter-clockwise rotation,1.remove the checkball cap andset aside.Remove existing checkball and2.discard properly.Place new checkball in port.3.Lubricate o-ring on checkball4.cap with motor oil or clean fuel.Thread checkball cap into5.mounting head in a clockwiserotation. Tighten firmly - do notover tighten.Start engine and check for leaks.6.Correct as necessary withengine off.Installation Instructions:

/ 2

Related manuals for Parker Racor 200 Series