Passive House Systems PHS MEV-H Installation Manual
Page | 1 Rev: 210301AFTER INSTALLATION THE END USER SHOULDKEEP THIS GUIDE FOR FUTURE REFERENCEDO NOT THROW AWAYSHOULD YOU ENCOUNTER ANYPROBLEMS INSTALLING THISUNIT, CALL US: 021 4875297PHS MEV-HCONTINOUS MECHANICAL EXTRACT VENTILATION UNITINSTALLATION MANUAL* Read this manual carefully before using the product and keep it in a safe place for reference.This product was constructed up to standard and in compliance with regulations relating to electrical equipment andmust be installed by technically qualified personnel. The manufacturer assumes no responsibility for damage topersons or property resulting from failure to observe the regulations contained in this booklet.CONTENTS1. Precautions for Installation, Use and Maintenance. 8. Dimensions.2. Introduction. 9. Installation & Commissioning3. Technical Specification. 10. Electrical Wiring.4. Operation. 11. Fan speed setting.5. Maintenance. 12. Humidistat setting.6. Disposal and recycling. 13. ERP Directive Compliance7. Standard Conformity 14. Warranty1.0 Precautions for installation, use and Maintenance1. The device should not be used for applications other than those specified in this manual.2. After removing the product from its packaging, verify its condition. In case of doubt,contact a qualified technician. Do not leave packaging within the reach of small children orpeople with disabilities.3. Do not touch the appliance with wet or damp hands/feet.5. Do not use the product in the presence of flammable vapours, such as alcohol, insecticides,gasoline, etc...6. If any abnormalities in operation are detected, disconnect the device from the mains supplyand contact a qualified technician immediately. Use original spare parts only for repairs.7. The electrical system to which the device is connected must comply with local regulationsand must be examined and tested by a qualified electrician. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine