Patton SmartNode 41 Series Manual
    |
1Leaflet Multiport Patton ATA (SmartNode (SN) 41xx(s), 43xx und 44xx)A. General informationThe Patton Multiport-ATA (Analogue Telephone Adapter) connects analogue devices to IP-based datanetworks. It is excellently suited for integrating analogue fax machines (T.38). Of course it can alsobe used to integrate analogue telephones or door openers, which then establish a connection to theNFON telephone system.The Patton ATA converts voice traffic into data packets for transmission via your IP network. Thanksto the international standards for voice- and data networks, the Patton ATA ensures reliableoperation.The following Patton models are available:» Patton SN 4112s (up to 2 analogue devices)» Patton SN 4114 (up to 4 analogue devices)» Patton SN 4118 (up to 8 analogue devices)» Patton SN 4316* (up to 16 analogue devices)» Patton SN 4324* (up to 24 analogue devices)» Patton SN 4332* (up to 32 analogue devices)» Patton SN 4412* (up to 12 analogue devices)» Patton SN 4416* (up to 16 analogue devices)» Patton SN 4424* (up to 24 analogue devices)» Patton SN 4432* (up to 32 analogue devices)The following connection cables are available for Patton models:Patton SN 41xx models are connected with a standard patch cable (RJ45)Patton SN 44xx models require a separate connection cableYou can choose between 2 “general” cable types with the following cable heads for the 12, 16 and 24port Patton:Patton connection cable 50 PIN TELCO on 50 PIN TELCOPatton connection cable 50 PIN TELCO on open endYou can choose between 2 different cable types with the following cable heads for the 12 and 16port Patton:Patton connection cable 50 PIN TELCO on RJ45Patton connection cable 50 PIN TELCO on RJ11You can choose between 2 different cable types with the following cable heads for the 24 portPatton:Patton connection cable 50 PIN TELCO on RJ45Patton connection cable 50 PIN TELCO on RJ11 |
Related manuals for Patton SmartNode 41 Series
manualsdatabase
Your AI-powered manual search engine