Q-Light S80AS Operating Manual
Also see for S80AS: Operating manual
   |
S80ASThank you for purchasing Q.Light product. Please read thismanual carefully before installing this product for safe and longuse.▪ Suitable for a bright place and a signal transfer for a longdistance with a strong strobe signal light.▪ Easy to change its lamp by taking a connector type lamp.▪ Material : Lens-AS, Body-ABS▪ Flashes : 60-80/Min.▪ Protection Class : IP44▪ General SpecificationModelRatedVoltageCurrent Weight Flashes ColorS80ASDC12V 0.433A 0.28Kg60~80/min.RED-RAMBER-AGREEN-GBLUE-BDC24V 0.216A 0.28KgAC110V 0.076A 0.26KgAC220V 0.061A 0.26Kg▪ External View DrawingS80ASThis item can connect power lines to the plate element locatedat the bottom board of this item. Please read carefully thisinstruction to wire.1).Separating the bottom board and the bodyReleasing the bolts(M4-1EA)④ which connected the bottomboard. and separate the bottom board① and the body② thencheck inside.2).Connecting power linesPlease connect power lines refer to the upper product structure.Releasing the bolts(M4-2EA)⑤ attached on the plate element③and connecting O type terminal or Y type terminal linked with thepower lines outside.▪ In case of product using AC voltage, connect the line withoutPolarity(wire color).▪ In case of product using DC voltage, black line is negative(-).※ After finishing the power lines connection and attached theproduct well, the electric power supplies by the plate element⑦on the body②.Indoor OutdoorOPERATING MANUALXenon Lamp Strobe LightProduct StructureWiring InstructionMounting |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine