Q-Logic QLT-1.0012SS Installation Instructions Manual
  |
Thankyou for choosing Q-logic! - Quite possibly the most advanced loudspeakerenclosure available for Mobile Electronics andthe ONl Ysubwoofer enclosure withinterchangable baffles, affording the usera multitude ofinstallation options (See your Q-logic dealer for details), and the Qxs -Ring (patent-pending), a multi-diameter woofermounting adapter that can extract optimum performance from any driver you choose!Follow these instructions to custom fityour driver to the enclosure.YOUR INSTAlLA TION CAN MAKE A HUGE DIFFERENCE IN THE SOUND QUALITY!Step 1: Set up.A. Place the enclosure on a solid work surface with the driver mounting hole facing up.B. Remove and unpack the hardware kit located inside the enclosure. The kit containsmounting screws, speaker lead, QXs - Ring and a polyfill sheet.C. Connect the speaker lead to the terminal cup. Connect red to positive andblack to negative. Lay the polyfill sheet along the back and bottom of the enclosure.Step 2: Installing the Driver.A. If your driver has a mounting diameter of 11.125" or less, you are ready to install thedriver. However, if you have a driver with a mounting diameter greater than11.125", check out the section on the back for additional instructions before continuing.B. Place the QXs - Ring onto the baffle surface so that the angled portion extends into thecutout area.C. Connect the speaker lead provided with the enclosure to the driver. Be sure to connectred to positive and black to negative.D. Center the frame of the driver within the rings in the QXs - Ring. Use the locationmarks on the QXs - Ring as guides to align the driver mounting holes. Confirm theSupplied Hardware:1 - Qxs - Ring8 - Woofer Mounting Screws1 - Speaker Lead1 - Polyfil sheetContinued on other side: |
Related manuals for Q-Logic QLT-1.0012SS
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine