QMotion Cassette Installation Instructions Manual
  |
23(1) Install mounting brackets using suppliedscrews for inside mount using top mount holes.Measure/ mark/ pre-drill and install brackets 2-6inches from edge of bracket to window jamb.Be Advised: For Cassette systems greater than4 ft, you will be supplied with additional mountingbrackets. Evenly space these brackets dividing thetotal width of window opening by the number ofbrackets supplied.(3) Rotate cassette into vertical position towardswall or window until you hear and see the bottomof mounting bracket snap into place.Be Advised: Check to be sure all brackets havesnapped into position before releasing the cassettesystem.INSTALLATION TYPE: INSIDE MOUNTINSTALLATION TYPE: OUTSIDE MOUNT(1) Install mounting brackets using suppliedscrews for outside mount using back mountholes. Measure/ mark/ pre-drill and install brack-ets 2-6 inches from edge of bracket to edge ofshade11(2) Position cassette as shown to hook bracketon cassette.Shown in bracket lock positionBack mountingholesTop mountingholes2”- 6”2”- 6”Cassette Installation InstructionsAlways wear personal protection equipment, including safety glasses and gloves, when installing. If the shade isout of reach, use a ladder per its manufacturer’s instructions.9000142 - Revision 10.10.14 |
Related manuals for QMotion Cassette
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine