QNN SAFE AUSTRALIA PTY LTDABN 47 168 078 233Unit 9 / 376 Newbridge Road, Moorebank NSW 2170Web site: www.qnnsafe.com.auEmail: info@qnnsafe.com.auPhone: 02-87982669Page 1 of 4USER’S MANUAL FOR AH/B SERIESSAFESerial Number:This package contents: User manual 4 bolt down Screws M12mm x 80mm 4 AA Batteries (8 For F-3020EE)Please contact your dealer or Qnn Safe Australia P/L if any shortage accruedFor the first time use, it needs to supply 4 AA batteries power to the safe: Counter clockwise the Keypad then to insert the supplied 4 AA batteries into theBattery Box: After enter the right code, then turn the handle clockwise to open the doorThis safe is operated by the digital code.The factory setting for the Master Code is: “1 2 3 4 5 6 “Opening instructions: Single Control Mode : Press and then the code, and then press .(Factorysetting at Single Control Mode , Master Code “123456”) Dual Control Mode: Press and then the first code, and then press , and thenthe second code, and then press . (Please note: The pause between the two codeentering is 60 seconds) Green light on with one beep indicated that the digital lock is unlock.( factorysetting master code “123456”) Turn the handle clockwise, safe now is unlocked.