Page 1 of 10 regen_100418.pdfQRPGuys K8TND Regenerative ReceiverFirst, familiarize yourself with the parts and check for all the components. If a part is missing, pleasecontact us at qrpguys.parts@gmail.com and we will send you one.Please read all the instructions before starting to assemble the receiver.Parts List1 – QRPGuys K8TND Regen Receiver PCB, 4 pieces1 – U1, LM386 DIP IC1 – Q1, 2N3904 transistor1 – Q2, J310 FET1 – D1, 1N4001-7 diode, black, silver band on one end1 – D2, ISV149 varactor diode1 – D3, 1N4737A, 7.5V zener diode, small glass, band on one end1 - D4, high intensity led1 – R1, 2.2K resistor (red-red-red-gold)2 - R2,8, 1 meg ohm resistor (brown-black-green-gold)3– R3,7,11 10K resistor (brown-black-orange-gold)1 – R4, 5.6K resistor (green-blue-red-gold)1 – R5, 1K resistor (brown-black-red-gold)1 – R6, 10 ohm resistor (brown-black-black-gold)1 – R9, 51 ohm resistor (green-brown-black-gold)1 – R10, 4.7k ohm (yellow-violet-red-gold)7 – C1,2,5,7,11,12,15, .01uF mono capacitor, marked 1031 – C3, 560pF NP0/C0G capacitor, marked 561

QRPGuys K8TND Manual