K Series Loudspeaker AccessoryUser ManualK12 YOKEYoke spacer — 2 componentsM5 x 25 mm screw with thread locking patch — 4 componentsSteel yoke bracket – side 1 — 1 componentSteel yoke bracket – side 2 — 1 componentSteel yoke bracket – center extension — 1 componentM6 x 16 mm screw — 6 componentsM6 flat washer — 6 componentsM6 self-locking nut — 6 componentsM8 x 25 mm screw — 2 componentsM8 split lock washer — 2 componentsM8 flat washer — 2 componentsThis yoke mount is specifically for mounting the QSC K12 loudspeaker to a structural support element (lighting or soundstage truss or other loadbearing truss, etc.). It is not to be used as a wall mount or other attachment to non-load rated structure.IMPORTANT SAFETY PRECAUTIONS AND EXPLANATION OF SYMBOLSWARNING!Before placing, installing, rigging, or suspending any speaker product, inspect all hardware, suspension, enclosures, transducers, bracketsand associated equipment for damage. Any missing, corroded, deformed, or non-load rated component could significantly reduce thestrength of the installation or placement. Any such condition severely reduces the safety of the installation and should be immediatelycorrected. Use only hardware which is rated for the loading conditions of the installation and any possible short-term, unexpectedoverloading. Never exceed the rating of the hardware or equipment.Consult a licensed, Professional Engineer regarding physical equipment installation. All local, state and national regulations regarding thesafety and operation of equipment are understood and adhered to.Do not use this yoke bracket to attach the K12 to a wall or other architectural element!•Attach the base of this yoke bracket to the load-bearing structure using appropriate load-rated hardware approved for the application.•Install in accordance with instructions by QSC Audio Products, LLC instructions and under the supervision of a licensed Professional Engineer.•The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operation andmaintenance (servicing) instructions in this manual.*TD-000291-00*TD-000291-00-A© 2009 QSC Audio Products, LLC. All Rights Reserved. QSC and the QSC logo are registered trademarks of QSC Audio Products, LLC inthe U.S. Patent and Trademark office and other countries. All other trademarks are the property of their respective owners.Patents may apply or be pending.All manuals and user guides at all-guides.comall-guides.com