QUATROS QS19323 Owner's Manual
   |
aaPW TECHSAM Woch Sp. J. tel. 81 444-63-73ul. Warszawska 131 tel. 81 443-08-1220-824 Lublin fax 81 458-38-19www.quatros.eu e-mail: techsam@quatros.plIMPORTER:OWNER’SMANUALHYDRAULIC SHOP PRESS 20TQS19323DESCRIPTIONHydraulic Shop Press 20T Dual Pump QS19323: Capacity: 20T | Working range: 0 - 955mm | Weight: 90kgHydraulic Shop Press 20T with multi-position bed for work height adjustment used for parts straightening, bending and pressing.SAFETY INSTRUCTIONSWARNING- This press is designed and intended for use by properly trained and experienced personnel only. If you are not familiar withthe proper and safe operation of a hydraulic press, do not use until proper training and knowledge has been obtained.- Do not operate this press beyond it rated capacity.- DO NOT compress springs or other objects that could be ejected from the press. DO NOT compress objects that couldshatter.- Check the press for loose or damaged parts before each operation. Replace damaged parts and tighten all loose boltsbefore operating.- Some parts being pressed may have a tendency to pop out of the press or explode under pressure. Protect yourselfaccordingly.OPERATIONWARNING! Ensure that you read, understand and apply the safety instructions.OPERATION1. Place work piece on bed frame.2. Locate and close release valve.3. Pump handle until the ram nears work piece.4. Apply load to work piece by pumping handle. Do not overload work piece.5. Remove load from work piece by turning release valve. Stabilize work piece so it does not fall while pressure is released.6. Remove work piece after ram is fully retracted.MAINTENANCE- Periodically, lightly oil all moving parts including the pump pistonand hydraulic ram.- Check hydraulic connections and hoses before each use. Do notuse if cut, damaged, leaking or otherwise damaged connectionsand/or hoses are notes. |
Related manuals for QUATROS QS19323
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine