QVC MYSafe 911 Instructions Manual
  |
+Insert batteries (included) intobattery compartment per diagram.Press right side battery checkbutton for 2 seconds. Front LED lightwill temporarily light green ifbatteries are ok. LED light will lightred if batteries are low. If the LEDlight is not on, recheck the positionof the batteries and repeat untilgreen or red light is on.To call 911, press and hold the callbutton for (front button with large +symbol) 5 seconds until you hearthe device say CALLING 911 andthe LED light will show blue. Thedevice will connect to 911 operator.If call fails to go through, you willhear DISCONNECTED, REDIALand device will retry calling 911until an operator can be reached.To disconnect, press left sideCANCEL button or wait for operatorto hang up. Once disconnectedblue LED light will turn off.This device is designed to call 911 ONLY.It is recommended to check battery every 2 weeks. Front LED light will light red if batteries need to bereplaced. Replace with AAA batteries.This unit does not provide location. Please let the operator know your exact location. Additionally, thisunit does not allow for call backs and will appear as an unregistered device to the 911 operator.BATTERYCompartmentCANCELButtonBATTERYCHECKButtonCALLButtonINSTRUCTIONSALARM SETUPALARM OPERATIONBlue LED Light = Call in progressGreen LED Light = Battery good and devicein standby mode for calling 911Red LED Light = Batteries low. Replacebatteries.LED LIGHT INDICATORSBACKFRONTLED LightLEFTSIDERIGHTSIDEBatteryCompartmentBatteryCompartmentNOTEAA BB |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine