Qazqa 102410 Instruction Manual

Qazqa 102410 Instruction Manual Manual pdf 1 page image

Please study the instruction manual and below information carefully before installing or usingthis product. Please keep this user manual for further reference1. The luminaires may only be installed by authorized and qualified technicians according the validregulations for electrical installation.2. Maintenance of the luminaires is limited to their surfaces. During maintenance no moisture can comeinto contact with any areas of the terminal connections or voltage control parts.3. The electrical supply must be switched off at the outset, preferably by means of a switch in the distributionbox, before any installation, maintenance or repair work is undertaken.4. Exterior lighting must not be installed during rain.5. Take account of the minimal separation distance from other objects and the room required around the fitting.6. If in any doubt, consult a professional, taking local installation requirements into account. Some countriesstipulate that lighting may be installed only by registered installers.7. Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12Vlow voltage conductors.8. When replacing a halogen lamp, wait for it to cool, for a minimum of 5 minutes.9. Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electricalcomponents10. Take account of all available technical information.11. Take note of the symbols when connecting wires:N =Neutral L =Live =Earth12. Meaning of symbols:III220-240V~50HzMax.ø50mmGU102Max.50WIPXX3xmin.0,75mm²8mmLight Angle35cm²55ºSAFETY INSTRUCTION0.5mFor indoor use only, where direct contact with water is impossibleProtection Class I: the fitting must be earthedProtection Class II: the fitting is doubled insulated and does not require earthingProtection Class III: the fitting is low voltageMinimum distance from lighted objects (meters)Only the self-shielded halogen lamp should be used with the luminaireStrip the wire to the indicated length (mm);different items require different lengthConnect using the specified cable; different items require different cablesThe type of lamp and maximum size and wattage indicated in each lighting unit must notbe exceed; different items require different kind of light sources with different bulb iconsThe armature is designed to work only with the indicated voltage. Different items requiredifferent working voltage.The luminaire can be used in combination with a dimmerThe reference light angle and light space of the luminaireThis luminaire cannot be disposed together with normal domestic waste in standard rubbishcan, but you have to bring it to a staging area for electrical wasteThis icon indicates the level of water-proof and dust-proof

/ 2

Related manuals for Qazqa 102410