EMCL50U SeriesEMCL50U - 24 - R[Model number] [Voltage] [Color] | | |• EMCL50U• EMCL50U-BZ• 24 - DC24V R-RedA-AmberG-Green6785dB5525Ø501998M30Model number Layers Voltage Current Certificate Weight ColorEMCL50USteadyEMCL50U-BZSteady w/built-in buzzer3 DC24V 0.041A 0.19KgR-RedA-AmberG-GreenEMCL50U, EMCL50U-BZProduct SpecificationsIndustrial LED beaconThank you for purchasing Qlight’s products. Please read this user manual carefullyprior to installation and operation to ensure safe and correct use.1. During wiring or maintenance, please completely turn off thepower of the product. (Failure to follow this may lead to an electricshock.)2. Do not install the product in locations that subjects it to excessivedust or water other than the conditions designated by the IPprotection ratings indicated for each product. (Failure to followthese instructions may cause a fire to the product, electric shock,physical injury, malfunction or damage to the product.)3. Do not alter or repair this product. If maintenance or repair serviceis required, please contact your local Qlight contact point.(Failure to follow these instructions may lead to fire, electric shock,or product damage.)4. Please apply the correct voltage to the product. (Failure to followthese instructions may lead to fire, electric shock, or product damage.)5. When the product is applied to a condition that may impact livesor property, please make sure to have a double safety device.(Failure to follow this may cause damage to property, fire, electricshock and loss of life.)Precautions for SafetyFailure to follow the instructions below may cause aloss of life or serious physical injury.1. Please remove any objects that can interrupt ventilationaround the product.2. Please turn off the power of the product immediately if it failsto operate properly.3. Carefully wire the product according to each product’sspecification.4. Please be careful in preventing chemicals such as thinner,benzene, etc. in contact with the surface of the product.5. Do not apply excessive force/impact to the product.6. Failure to follow any of the instructions above may causemalfunction or damage to the product, fire, and electricshock.Precautions for Correct UseFailure to follow the proper instructions may causedamage to property, the product, or malfunction of theproduct that would void the warranty.Dimensions (Units : mm)Ordering SpecificationsPlease scan the QR code for moredetailed product information.www.qlight.com