Qlight SPK Instructions Manual
    |
1Panel Mounted SpeakerSPKModelnumber Voltage Current Built-in sound Certificate WeightSound type Ch Sound pattern dBSPKDC12VDC24VAC110VAC220V0.288A0.155A0.036A0.018AWS-Warningsounds1 Fire.A- ANG 85dBDC-0.19kgAC-0.21kg2 Emergency WA-U(Yelp) 85dB3 Ambulance PI-PO(Hi-low) 85dB4 Machinery Fault 85dB5 High Expansion 83dBWM-Melodies1 Sweet Home 85dB2 For Elise 85dB3 Cuckoo's Waltz 85dB4 Piano Sonata 85dB5 Turkish March 85dBWA-Alarms1 Beep Intermittent 83dB2 Door Chime 83dB3 Phone Ring 85dB4 PI.PI.PI Short 85dB5 Tripping Beat 85dB235025 85dB• Protection rating : IP23• Ambient operating temperature : -25°C to +50°C※ CE compliant : DC24VSPK - WM - 220[Modelnumber] [Sound] [Voltage]| | |• SPK • WS-Warningsounds• WM- Melodies• WA-Alarms• 12-DC12V• 24-DC24V• 110-AC110V• 220-AC220VOrdering Specifications SpecificationsThank you for purchasing Qlight’s products. Please read this user manual carefullyprior to installation and operation to ensure safe and correct use.Precautions for SafetyFailure to follow the instructions below may cause a loss of life or serious physical injury.1. Please remove any objects that can interrupt ventilation around the product.2. Please turn off the power of the product immediately if it fails to operate properly.3. Carefully wire the product according to each product’s specification.4. Please be careful in preventing chemicals such as thinner, benzene, etc. in contact with the surface of the product.5. Do not apply excessive force/impact to the product.6. Failure to follow any of the instructions above may cause malfunction or damage to the product, fire, and electric shock.Precautions for Correct UseFailure to follow the proper instructions may cause damage to property, the product, and or malfunction of theproduct that would void the warranty.1. During wiring or maintenance, please completely turn off the power of the product. (Failure to follow this may lead to an electric shock.)2. Do not install the product in locations that subjects it to excessive dust or water other than the conditions designated by the IP protectionratings indicated for each product. (Failure to follow these instructions may cause a fire to the product, electric shock, physical injury,malfunction or damage to the product.)3. Do not alter or repair this product. If maintenance or repair service is required, please contact your local Qlight contact point. (Failure tofollow these instructions may lead to fire, electric shock, or product damage.)4. Please apply the correct voltage to the product. (Failure to follow these instructions may lead to fire, electric shock, or product damage.)5. When the product is applied to a condition that may impact lives or property, please make sure to have a double safety device. (Failure tofollow this may cause damage to property, fire, electric shock and loss of life.)Please scan the QR code for moredetailed product information.www.qlight.com |
Related manuals for Qlight SPK
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine