Qonnect PL-80R Operating Instructions Manual
  |
PL-80ROPERATING INSTRUCTIONSHAND TOOL FOR BLIND RIVETS UP TO Ø 6.4 MMTECHNICAL INFORMATIONCapacity: 3.0/3.2 mm – 4.0 mm – 4.8/5.0 mm – 6.0 mm –6.4 mmMaterial: Aluminium, steel and stainless steelSize: 500 mm (L) x 171 mm (H) 60 mm (P) 24 mm (0)Weight: 2.3 KgDESCRIPTION OF THE TOOL1. Tool body2. Lever3. Nosepiece 6.4mmRead the manualINSTRUCTIONSThe hand tool will be standard equipped with the 6.4mm nosepiece forblind rivets.The other components will be stored separately on the side of the leverof the tool.FIRST USE:Make sure before using the tool that the nosepiece is suitable for theblind rivet of use. Otherwise, change to a different size.CHANGE TO A DIFFERENT SIZE BLIND RIVET:Close the tool completely by pushing the lever towards the body of thetool. Now use a wrench to unscrew the nosepiece of the tool. Replaceit with the correct nosepiece that is stored on the side of the lever ofthe tool.HOW TO SET A BLIND RIVET:Open up the tool completely, by pulling the lever away from the bodyof the tool. This way the jaws will open up. Now insert the correct rivetin the nosepiece, and place it within the workpiece of choice. To setthe rivet, push the lever towards the body of the tool. Depending onthe stroke needed to set the rivet, repeat the process until the mandrelof the rivet breaks. To release the broken mandrel from the tool,completely pull away the lever from the tool body.AManual PL-80RBManual PL-80R1 04L00022 6 04Z00034 11 04L21351 16 04L00636 21 04Z001032 04L00021 7 04L00015 12 04L21352 17 04L00627 22 04Z001293 04L00020 8 04 Z00035 13 04Z00119 18 04Z00167 23 04Z001644 04L00019 9 04L00017 14 04L00663 19 04Z00166 24 04Z001655 04L00018 10 04L00023 15 04L00629 20 04Z00102 25 04L21305HL1pull-link PL-80R320P |
Related manuals for Qonnect PL-80R
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine