Qstarz BT-Q816 Quick Installation Manual

Qstarz BT-Q816 Quick Installation Manual Manual pdf 1 page image

BT-Q816 Super 51-CH Performance Bluetooth GPS ReceiverBT-Q816 Quick Installation GuideThank you for purchasing Qstarz BT-Q816 51-Channel Bluetooth GPS Receiver. It provides 25 hours ofnavigation and supports Smart Power control for power saving.Main features:z Adopt MTK chipset with high sensitivity to -158dBmz Up to 25hrs operating time for GPS navigationz 51-Channel Performance tracking for fast acquisition and reacquisitionz Fast Position Fix ,Cold start 36s, Warn start 33s,Hot start 1sz Vehicle tracking & Location base servicesz Smart power control – Auto On-Off functionz Compatible with Bluetooth Serial Port Profile (SPP) in 15m wirelesslyA. Standard PackageGPS Unit BT-Q816 (1) + Lithium-ION Rechargeable Battery (2) + Cigarette Adapter (3) + Optional Travel Charger (4) + Warranty Card +Quick Installation Guide.NOTE: The Cigarette Adaptor can only be used to charge BT-Q816. Please don’t make use of it with devices other than BT-Q816.1. 2. 3. 4. (Optional)B. Appearance1. Power jack (mini USB type)2. Power switch3. Battery status LED (Red/Green)4. Bluetooth status LED (Blue)5. GPS status LED (Orange)6. Internal antennaC. Battery installationC-1 Put Battery in place: Press the PUSH button on the bottom side of the unit (1) and pull out the battery cover. Insert battery in theunit (2) and put battery cover on to the cabinet (3), then push down and force it forward to fit firmly (4).1. 2. 3. 4.C-2 Take Battery out: Press the PUSH button on the bottom side of the unit (1) and pull out the battery cover (2). Then take out thebattery from the unit (3).1. 2. 3.D. Charging your battery1For the first time using the BT-Q816, please charge battery until it is fullycharged. Take the power cable and connect it to the power jack (mini USBtype) and recharge through travel charger or car cigarette adaptor. This willbegin to charge the battery. Charging time is 3 hours typically.- When the Power LED is Red, battery power is low status. Please recharge.- When the Power LED is Green, the battery is under charging mode.- When the Power LED is blinking, the battery is fully charged.1６２４３５

/ 2

Related manuals for Qstarz BT-Q816