Waterproof Drones - The HexH2O and QuadH2O professional waterproof dronesWaterproof Multirotorshttps://www.quadh2o.comThe HexH2O V2 Build GuideThe following build guide is specifically for the HexH2o Version 2 model (go here for Version 1models).You are free to build the HexH2o in whichever way you wish, however we recommended you followis guide closely in order to get the most from your machine.This tutorial is based on using the DJI E600 Tuned Propulsion SystemHexH2o V2 is specifically designed for the DJI E600, if you wish to use a different propulsionsystem please contact us before placing your order and we can supply you with the V1 model.1. UNPACKING YOUR HEXH2OYour kit will include:Painted HexH2o V2 bodyFoam buoyancy aids & retainer stripsPerspex viewing dome and rear hatch with retaining clips and sealCarbon top and bottom plates6 x Carbon Fibre 16mm arms6 x Lightweight carbon motor mount assembly6 x Folding centre arm assemblyHexH2o sticker kitGoPro (3 & 4) anti reflection stickerElectronics tray with DJI Naza and gimbal mountsDistribution board mount24v Cooling FanBolt, washer and grommet kitGPS Mount/casing assemblyNaza LED stand off and grommet assemblyCable location mounts & cable tiesVelcroBreather kit2 x HexH2o hex keys and mini levelGimbal lock (locks gimbal in place during transportation)1 / 25