Quark-Elec Manualhttps://www.quark-elec.com 1 of 16 2017V1.0QK-A027 Wireless AIS+GPS ReceiverWith SeaTalk* ConverterFeatures Two independent receivers monitoring both AIS channels (161.975MHz &162.025MHz) anddecoding both channels simultaneously Sensitivity up to -106 dBm@30% PER Up to 45 nautical miles receiving range Powered by the SeaTalk bus(<105mA@12.0V) NMEA 0183 message output through Wi-Fi, USB and RS422 Configurable baud rates: (4.8, 9.6, 38.4k input and output) Simultaneous wireless and USB output. The internal Wi-Fi access point connects up to 4 devices simultaneously Ad Hoc and Station operating modes SeaTalk to NMEA 0183 protocol converter Built-in GPS to provide positional data Combines GPS and AIS messages with NMEA 0183 and outputs as a seamless stream ofdata BNC connector for 50 Ohm VHF antenna Powered SMA connector for 50 Ohm GPS antenna Plug & Play connectivity with chart plotters and PCs Compatible with Windows, Mac, Linux, Android and iOS (Initial Configuration must becompleted using Windows software.) This device connects to NMEA 0183 and is compatible with RS422 output devices. NMEA0183-RS232 devices can connect to our device by using the Garmin Bridge (QK-AS03) This device does not come pre-loaded with map data. We advise using openCPN for mapdata. Some iOS apps may charge for map use