Disclaimer: This product is designed to aid navigation and should be used to augment normal navigationalprocedures and practices. It is the user’s responsibility to use this product prudently. Neither Quark-elec, northeir distributors or dealers accept responsibility or liability either to the product user or their estate for anyaccident, loss, injury or damage whatsoever arising out of the use or of liability to use this product.Email: info@quark-elec.comV1.0(1/19)QK-A032The NMEA 0183 side can be connected to a multiplexer if connecting more than oneNMEA 0183 device to your N2K network.6. Connect via WiFi if desiredAd-hoc mode WiFi (direct A032 to phone/tablet/PC) is the default setting, this requires no Windowsconfiguration. On your device (phone/tablet/PC): 15 secondsafter the A032 has powered up, you can scan fora WiFi network with an SSID similar to ‘QK-A032xxxx’. Connect the device to ‘QK-A032xxxx’with the default password: ‘88888888’. In your chart software: set the protocol as‘TCP’, IP address as ‘192.168.1.100’ and the portnumber as ‘2000’ in the chart software.Station mode WiFi (A032 through a router/access point - to phone/tablet/PC) allows you toaccess your data at the same time as your other WiFi network data. This option requiresconfiguration to set up the connection between the A032 and your router. See the‘Configuration’ section of the manual and configuration instructions on the CD provided.7. Need to Configure baud rates, USB or WiFi settings?The device is set to connect wirelessly in Ad-hoc mode (with no need for a router or access point)If you want to change to Station mode (connecting through a router) or adjust other setting, seethe configuration section of the manual and the configuration instructions on the CD provided.SET-UP GUIDEAll products are CE, RoHS certifiedwww.quark-elec.comQK-A032NMEA 2000/0183BI-DIRECTIONAL GATEWAYPlease recycle your packaging What You Need Installation Overview Notes