Quasar EazyRizer Assembly Instructions Manual
        |
EazyRizer™ Assembly InstructionsDear EazyRizer™ Owner,Congratulations on your purchase of EazyRizer, the world’s safest and most versatile motorcycle lift.With regular maintenance and careful handling, EazyRizer will provide you with a lifetime of service.Just in case, each EazyRizer lift comes with a lifetime mechanical warranty for the originalowner.PLEASE READ CAREFULLY all of these assembly instructions presented here before you attempt to puttogether your lift. If you are in doubt regarding any of the assembly steps, please feel free to call us at1-800-627-1700 for assistance.Happy lifting with EazyRizer. WWW.ON-BIKE.COMManufactured by North American Distributor:Quasar Products Ltd. Driven Gear Inc.The Sovereign Center Neander 2818 S. I-85 Service RD., Suite CTamworth, Staffordshire, England V79 7XA Charlotte, NC 2820844-01827-61754 704-394-2080Step 1: Recommended tools required for assembly:- torque wrench - 13 mm open end wrench- 13 mm socket - 17 mm socket- socket wrench - adjustable wrench- 22 mm socket - good quality car wax / polishWith the shipping carton in the proper “This End Up” position, carefullycut the sealing tape and remove all of the carton strapping.Step 2:Carefully, remove all of the component pieces inside and lay them aside.All of the lifting attachments you ordered will also be inside this carton.You may find some of the smaller lifting attachments wrapped in bubblewrap placed inside the carton spacing sleeves.Step 3:There are only 3major components that make up EazyRizer. Pictured tothe right is the “H” base frame. You will find (2) 17 mm bolts withwashers and (2) 13 mm bolts with (4) washers and (2) Nylock™locking nuts. Remove the bolts, nuts, washers for now and put themaside in safe place. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine