Quatech ABDG-ET-DP501 Quick Start Manual

Also see for ABDG-ET-DP501: Specfications

Quatech ABDG-ET-DP501 Quick Start Manual Manual pdf 1 page image

Quick Start GuideAirborne Direct Ethernet AdapterABDG-ET-DP501/IN5010Revision v2.1February 2011Document Number: 940-0193-210Kit Contents:Upon receiving the kit please check that you received the following: ABDG-ET-DP501 or ABDG-ET-DP5010 Unit 5VDC Power Supply (2.1mm barrel jack)o included with ABDG-ET_DP501o optional for ABDG-ET-DP5010, included only if ordered as an accessory 2dBi, 2.4Ghz 50 ohm, omni-directional antenna Quick Start Guide Airborne Direct software and documentation CDIf any of the above contents are missing or appear damaged please contact Quatech Sales support directly at (800) 553-1170 orsupport@quatech.com.What you will need:To evaluate the unit you will need the following components and facilities: ABDG-ET-DP501 or ABDG-ET-IN5010 unit with included antenna attached. Laptop or desktop system with an Ethernet port. Power outlet for ABDG-ET-DP501/IN5010 power supply. Optionally 5-36 VDC power for the terminal block attachment (IN5010). 802.11b/g network for testing the unit, either AdHoc or Infrastructure (Access Points) mode. The test network configuration must beknown. Required information will include:o SSID (Wireless network name).o Security settings (WEP, WPA, WPA2, etc.).o Security credentials (passphrase, key or certificates).o Static IP address, Subnet Mask and Gateway address if static IP addresses are used on the test network. A web browser on the laptop top or desktop (Internet Explorer, Firefox, Opera and Chrome v4.0 are supported).Get other manuals https://www.bkmanuals.com