1Quickcrop Steel Fruit Cage Assembly Instructions1 - Check pack contents. For custom orders the parts list will be on the invoice. For standardcages the parts list is displayed under ‘specification’ on the relevant product page.2 - Mark out the post hole locations. The easiest way to do this is to temporarily build the roofsection; this may seem like unnecessary extra work but it is well with it as it removes anypossibility for error.The roof section is a grid made up of roof bars connected by clamp fittings. There are 3 types offittings used to build the roof as follows:3 way corner fittings - Place these fittings at the corners of your grid.4 Way fittings - Place around the perimeter of your grid where 2 poles meet.5 Way fittings - Place in the center of your grid where 4 poles meet. 5 way fittings are onlyrequired for cages over 2 bays deep.