Quoizel CAV3121WT Installation Manual
     |
1 of 52020 Quoizel Inc. visit us on-line at www.quoizel.comTools Required Fixture Hanging Height22.25” Dia.14”Package ContentsRemote ControlTransmitter X 1OBatteriesX 1PMounting BracketX 1QR Screwx 2PARTS BAG 3Preparation: Identify and inspect all parts before beginninginstallation. Check package content list and diagrams below toensure all parts are present. If any parts are missing or damaged,do not attempt to assemble, install, or operate the fixture.Missing Parts? Contact your original place of purchase.Released Date: 2020-07-27Warnings and CautionsREAD AND SAVE THESE INSTRUCTIONS1) Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.2) These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We stronglyrecommend that a licensed, professional electrician perform the installation.3) WARNING- To Reduce The risk of personal injury, Do not bend the blades when installing the fan, or cleaning the fan. Do not insert foreignobjects in between rotating fan blades.4) WARNING- To Reduce The Risk Of Fire, Electric Shock, Or Personal Injury, Mount To Outlet Box Marked (Acceptable for Fan Support of22.7kg(50lbs) or less) And Use Mounting Screws Provided With The Outlet Box.5) All set screws must be checked, and retightened where necessary, before installation.6) After making the wire connections, the wires should be spread apart with the grounded conductor and the equipment-grounding conductor onone side of the outlet box and the ungrounded conductor on the other side of the outlet box.7) Disconnect fixture from the power source before replacing bulbs or cleaning. Make sure the bulbs are given sufficient time to cool be beforeremoving.8) Suitable for use with solid-state speed controls.9)Use Only With Light Kits Marked Suitable For Use In Damp Locations10) This unit weighs 4.5kg.For Styles CAV3121WTInstallation GuideY Shadex 1Z Shade Holderx 1Light SourceBULB BASE TYPECandelabra (E12)4 BULBS REQUIREDBULB INCLUDEDBULB SHAPETYPE BLED6WX Ringx 1Hanger Frame x 1(Pre-assembled toFixture Body)AWood Screwx 2BFlat Washerx 4C Lock Washerx 4DSpring Washerx 4EWire Connectorx 3FPARTS BAG 1Machine screwx 2HMounting screw x 4(Pre-assembled toFixture Body)G S Allen Wrenchx 1Wall Anchorx 1JScrewx 1Flat Washerx 1ISet Screwx 1KFastenerx 1L MPARTS BAG 2Spring Washerx 1NT Fixture Bodyx 1U Fan BladeX 1W Blade AssemblyNut X 1V LED Bulbx 4 |
Related manuals for Quoizel CAV3121WT
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine