Quoizel QR1864C Assembly Instruction Manual

Also see for QR1864C: Assembly instruction sheet

Quoizel QR1864C Assembly Instruction Manual Manual pdf 1 page image

1of2Assembly Instruction Sheet #IS-QR1864C _R1For Style QR1864CPlease go to for product cleaning tips. Go to the selection.Flathead screwdriver, Phillips screwdriver, pliers, gloves, safety glasses.20-30 minutesIdentify and inspect all parts before beginning installation. Check package content list and diagrams below to be sure all parts arepresent. If any parts are missing or damaged, do not attempt to assemble, install, or operate the mirror. Contact customer service for replacementparts.www.quoizel.com Care + MaintenanceTools Required:Estimated Assembly Time:Preparation:Warnings and CautionsThese instructions are provided for your safety. It is very important you read them completely before installing the mirror. We stronglyrecommend that a licensed, professional electrician perform the installation. Quoizel recommends 2 people for each step during assembly.CMirror HangerHookMark "B"3”C(Step 2 Continued)mirror on the wall in the position you wish. Mark the wall at thebottom center of the mirror with a pencil lightly. This will beMeasurement A, the distance from the floor to the bottom of themirror.B. Place the mirror on a flat surface again and measure from thebottom of the mirror to the “D” hangers that will be used to hang themirror, this is measurement B.C. Add measurement A from step A above and measurement B togetherand mark this spot on the wall where the mirror will be hung.Measurement B is straight up from Measurement A you marked onthe wall in step A above.D. Measure the distance between the centerline of each “D” hangerand then divide this measurement by 2, this is Measurement C. Inorder to locate the exact hanger location on the wall, fromMeasurement B go to the right the distance of Measurement C andmark the wall. Do this going to the left of Measurement B as well andmark the wall. These two marks are the center of the hangers,Measurement C. The two marks you just made on the wall are thesame distance apart as the two hangers.E. (Refer Figure 2B) To determine where the Mirror Hangers (A) will befastened to the wall, measure up from Measurement C 3”. Do this intwo locations as illustrated and mark the wall.Figure 2BSTEP 3 Installing the 2 Mirror HangersPlease note the Mirror Hangers are adjustableallowing for easy leveling of the mirror as needed.-A. Using the Nails (B) provided with the Mirror Hangers (A) attach the 2Mirror Hangers (A) to the wall at the position just marked by Option Aor Option B.B. Once you have both Mirror Hangers (A) securely nailed in place,adjust as the length of the Mirror Hangers (A) so that each MirrorHanger (A) is the same length.Thank you for purchasing a Quoizel product.Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184or visit us on-line at www.quoizel.com2017 QuoizelInc. RevisedDate:2017-10-27Figure 3Hanger NailMirror HangerAdjustment ScrewHookPackage ContentsA Mirror Hangerx 2Mirror Framex 1B Hanger Nailx 4EMirrorx 1CDLock Screwx 4STEP 1 Assemble Mirror-A. Attach the Mirror (D) onto the MirrorFrame (E). Align the holes on theTabs to mounting holes on theMirror Frame. Thread Lock Screws(C) into mounting holes on theMirror Frame (E) to secure themtogether. Hand tighten until snug.Figure 1ECD“D” Hanger“A”Floor Surface“B”“C”BACKFloor SurfaceBACKOPTIONAL A OPTIONAL BSTEP 2 Identify the Points for mounting the Mirror Hangers ByUsing Measurement-A. Determine where the mirror will be placed on the wall and hold theFigure 2A“B” “C”“A”“D” Hanger

/ 2

Related manuals for Quoizel QR1864C