1of2Please go to for product cleaning tips. Go to the selection.LED 16WContact your original place of purchase.www.quoizel.com Care + MaintenanceLight Source:Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.Estimated Assembly Time:Preparation:20-30 minutesIdentify and inspect all parts before beginning installation. Check package content list and diagrams below to be sure all parts arepresent. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture.Package ContentsFixture Bodyx 1 BAMountingScrewx 3For Styles SNNL9009K and SNNL9009PNWarnings and CautionsTurn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We stronglyrecommend that a licensed, professional electrician perform the installation.STEP 1 - Mark the Location for the 3 Mounting HolesA. Place the light fixture onto the post and mark the location of the 3mounting holes on the fixture fitter onto the post with the markingpen.FixtureFitter Marking PenMountingHoleSTEP 2 M CE M H- arking the enter ofach ounting oleA. Remove the light fixture. Usingthe center punch and hammermarking the center of eachmounting hole location that ismarked with the marking pen.Center PunchHammerMarkingPostLightingPostPostPostFixtureFitterFigure 1Figure 2STEP 3 Drill Holes-A. Using the 1/16” bit and drill, drill a pilot hole completely through thepost at each (3) locations marked in step 2 above.1/16” bit and drillSTEP 4 - Wire ConnectionsA. Use standard wire connectors (C) to make all wire connections.Twist connectors until wires are tightly joined together. Wrap eachconnection with approved electrical tape and carefully stuff all theconnected wires into the Outlet Box.White wirefrom outlet box White wirefrom fixtureBlack wire fromoutlet box (or Red)Black wirefrom fixtureBare, or GreenGround wirefrom outlet boxGround wirefrom fixturePostFigure 3Figure 4STEP 5 Attach the fixture tothe Post Mount-A. Place the fixture on the postlining up the mounting holeson the fixture fitter with theholes on the post. Use theMounting Screws (A) toattach the fixture to the post.Your fixture is nowassembled and ready to use.Enjoy ! PostHoleFixtureFitterMountingHolePostLightingAFigure 5Installation Guide #IS-SNNL90092018 QuoizelInc. visit us on-line at www.quoizel.comWire Connectorx 3CReleasedDate:2019-08-09