Quoizel VVTH9348BN Assembly Instruction Sheet

Quoizel VVTH9348BN Assembly Instruction Sheet Manual pdf 1 page image

Quoizel, Inc.6 Corporate ParkwayGoose Creek, SC 29445Customer ServicePhone 631.273.2700Fax 631.231.7102www.quoizel.comWarnings and Cautions1of2Assembly Instruction Sheet #IS-VVTH9348For Styles VVTH9348BN,VVTH9348AB, IBVVTH93486 CORPORATE PARKWAYGOOSE CREEK SC 29445www quoizel com, .. .Thank you for purchasing a Quoizel product.Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700or visit us on-line at www.quoizel.com2014 QuoizelInc. March2014Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We stronglyrecommend that a licensed, professional electrician perform the installation.Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subjectglass parts to any shock while in operation or shattering may result.Package ContentsCADBECFSocketAssemblyx 1STEP 1 Install Rods and SocketAssembly-A. Thread the Socket Assembly (C) and theRods (D/E) to the Base (F) together asshown. Hand tighten until snug. Note: If theshade and the base are not lined up afterassembly, unscrew the hex nut on thebottom of the base with the wrench (B),adjust the rods until the shade and the baseare lined up. And then secure the rods toFigure 1ThreadedRodx 1Rodx 1Basex 1Tools Required: Flathead screwdriver, Phillips screwdriver.Bulb Recommended:Estimated Assembly Time:Preparation:LED 7W15-20 minutesIdentify and inspect all parts before beginning installation. Check package content list and diagramsbelow to be sure all parts are present. If any parts are missing or damaged, do not attempt to assemble, install, oroperate the fixture. Contact customer service for replacement parts.A Plugx 1B Wrenchx 1DEFAdjustmentButtonthe base. Hand tighten until snug withthe Wrench (B).B. Adjust the Support Arm and the Shadeto proper location by adjust theAjustment Buttons.C. Insert the Plug (A) into the cord fromthe Base (F) as shown.Your fixture is now assembled andready to use. Enjoy!Replace LED LampA. Unscrew the lock screws from the shade and remove the diffuserfrom the shade.B. Unscrew the screws on the LED Lamps and remove the LED lamp.Pull out the connectors from the fixture and seperate the connectorson the wires.C. Connect the female connector of the replacement LED lamp to themale connector from fixture. Attach the LED lamp into the shadeholder and secure with the removed lock screws.D. Place the diffuser back onto the shade and secure with the removedscrews. Hand tighten until snug.

/ 2

Related manuals for Quoizel VVTH9348AB